1-519-884-5545        Contact Us        Sign in

PlayStation Dual Analog Shock Controller


PlayStation Dual Analog Shock Controller



Details

Weight
1.01 lbs
Market price
$12.99
Our price
$9.95 (Save 23%) (US $9.95)

Options

Quantity


PlayStation Dual Analog Shock Controller !

  • Customers Also Bought

  • Customer Reviews

  • GameCube Video Game Pikmin

    GameCube Video Game Pikmin !
    $15.99
  • Maximus Stinger 3.0L RGH2 JTAG Add-on Board

    Team Maximus releases the Stinger 3.0L to RGH your XBox360 PHAT and SLIM (Trinity)

    Fast RGH 2 glitcher chip.

    New Model 3.0L (with crystal for Corona compatibility) PAD by PAD compatible with last Stinger 2.0, it uses same .jed or .xsvf files, the improvement are:

    • Super easy install on Slim Consoles (if used with the new QSB Kit 2.0)
    • Ultra fast boot times for SLIM Consoles
    • Embedded capacitor for stubborn PHAT consoles

    To use the 68nf capacitor for stubborn PHAT consoles just bridge the J68NF jumper and add a Ground wire on the AVG pad to the AV port.

    Features:

    • Clean and optimized design
    • Low digital noise
    • Onboard voltage regulations for 1.8v and 1.5v for a stable operation.
    • Less solder, 5 points for SLIM, 6 for PHAT
    • Less complication for PHAT models having Mode switch instead of having to reprogram for each model
    • Ultra fast boot times for PHAT and SLIM in less than 10 secs with or without latest Ameel "long wire trick"
    • Comes with programming cable (not a programmer)
    • Can be programmed with NandFlasher updated to Nandpro 3.0 or any JTAG programmer available

    Contents:

    • Maximus Stinger v3.0L
    • Ground Cable
    • Programming Cable

    The SLIM program works on all TRINITY boards.

    The PHAT program works on all HDMI models (Falcon, Zephyr, Jasper), and once programmed the model is chosen by setting the onboard solder jumpers.

    Chips can be reprogrammed using NANDFLASHER (updated to nandpro 3.0) or any JTAG cable.

    Hardware is the same for PHAT and SLIM. It is only the on-board program which can of course be changed later by the end user if needed.

    Support:

    http://360nandflasher.com

    $14.95
  • PIONEER DJM 600 Mixer

    CD / Line ?14dBV (200mV) / 22kW
    Phono ?54dBV (2mV) / 47kW
    Main Mic ?54dBV (2mV) / 3kW
    Sub Mic ?60dBV (1mV) / 3kW
    Return ?14dBV (200mV) / 22kW Output Terminals
    Master Out1 (RCA) 0dBV (1V) / 1kW
    Master Out2 (XLR) 4dBm (1.23V) / 600W
    Rec Out (RCA) ?10dBV (1V) / 1kW
    Booth Monitor 0dBV (1V) /1kW
    Send ?14dBV (1V) / 1kW
    Phones 0dBV (1V) / 22W Frequency Characteristics
    CD / Line / Phono 20Hz to 20kHz Signal To Noise Ratio
    CD / Line 87dB (with effects off)
    Phono 77dB
    Mic 69dB Total Harmonic Distortion Rate
    CD / Line / Phono Below 0.02%
    Cross Talk Over 70db Channel Equalizer
    Hi +12dB, ?26dB (13kHz)
    Mid +12dB, ?26dB (1kHz)
    Low +12dB, ?26dB (70Hz) Microphone Equalizer
    Hi +12dB, ?12dB (10kHz)
    Mid +12dB, ?12dB (1kHz)
    Low +12dB, ?12dB (100Hz) Effector
    Delay and Echo 1 to 3500mSec
    Pan, Trans, Filter & Flanger 10 to 16000mSec
    Reverb 1 to 100%
    Pitch 0 to ±100% Miscellaneous
    Power Requirements: AC 120V, 60 Hz
    Power Consumption: 36 W
    Net Weight: 14 lbs 9 oz (6.6 kg)
    Dimensions (WxHxD): 320x107x357.4 mm (12-3/8 x 4-3/16 x 14-1/16 inch)
    $1459.00

Categories

Manufacturers

Recently Viewed