XBox NME-360 2.0 Modchip
Economy BIOS Clip Testing Unit ! Economy BIOS Clip Testing Unit is a very useful assistant for Mod Chips with BIOS clip installers. It displays the result of the clip installation and connection by LED signal!
XBox 360 PHAT Unlock Kit includes 2 unlock tools specially design for quick opening of the console and of a full high quality T10 screwdriver (with handle).
Note: The second small tool is now built into one tool piece (2 in 1).
This product connects the XBox to TVs with audio and composite video input terminals. Use S-Video or regular AV Capabilities. Third Party product. Japanese version compatible with all XBox consoles sold worldwide.
XBox Power Supply version 1.6 a / 1.6 b - In case you damaged the original power supply (built-in) of your Xbox? (e.g. if you connected your Japanese Xbox? to 220V) you can use this one as a replacement. Works for versions 1.6 of Xbox?,
External Xbox 360 air coolers can only cool the temperature of the Xbox 360's outer surface but do not cool the temperature of the CPU/GPU; therefore, making them useless to combat CPU/GPU overheating. The XCM high speed air cooler directly cools the xbox 360 CPU and GPU. Using internal temperature measuring devices, this product monitors the temperature of the xbox 360 CPU and GPU. XCM high speed air cooler's external controller will allow you to control the speed of the fan while it monitors the temperature of the xbox 360 CPU and GPU. AUTO mode will automatically adjust the fan speed depending on the temperature of the CPU and GPU.
The 360 LiteKey by Maximus is an advanced version of the Lite-On rebuild board, this little device serves as not only a rebuild PCB for the Lite-On 83850 V2 & 93450 V3, but it also acts as a Vampire spear as well, so all you need to do with the 360 LiteKey is install it and use the Xtractor Pro, or the 360 power unit from the USB Xtractor to then do a full firmware dump of your drive.
But that’s not the only function of this neat little invention, as some of you may know, when using the LT firmware on the Lite-On 83850 V2 & 93450 V3 drives, before you accept any updates for the 360 console you should really flash the firmware on your drive back to its original state before doing the update, this is where the Maximus 360 LiteKey really shines, because after installation there is no need to open the drive again to be able to do this, the 360 LiteKey can auto switch between operational mode or firmware extraction mode, where if you were using something like the standard Lite-On rebuild board, to flash the drive back to its original state you would need to open the drive and use the Vampire to make the full dump needed to finalize the process, with Maximus 360 LiteKey that’s a thing of the past, after the first install there is no need to ever open the drive again.