PS2 Auto Key 3 Mod Chip

Neo 2.5 DVD-KEY Guide
For PS 2 V4 version only.
Need AR2 or GS2 1.71, 1.91, 1.93 version as a swap disc.
Region-X can also be used for booting.
AR2 and GS2 V2 version don't support the Neo 2.5 DVD-Key.

PS2 NEO2.2 Pro ModChip ! Install the PlayStation 2 NEO2.2 Pro ModChip in your PS2, and instantly play all of your regular PlayStation games without the need for a swap trick. As well, all PlayStation import originals and more now boot without the need to hold down the 'Eject' button. Combine with an InterAct GameShark2 and your PS2 NEO2.2 PRO ModChip and you will be able to play CDR of your favorite PlayStation 2 games including EA Sports titles. The all new, enhanced EA boot method now allows 6 seconds to swap discs and completely stops the GameShark2 disc prior to ejection. The following will help you identify what version of PlayStation 2 you have in your possesion. Ther version 1, 2 and 3 PlayStation 2 all have 10 screws on the bottom of the unit.SCPH30001 v1 = Serial# begins U1 SCPH30001 v2 = Serial# begins U0 SCPH30001 v3 = Serial# begins U1 Date 1A SCPH30001 v3 = Serial# begins U2 Date 0D The version 4, 5, 6 and 7 PlayStation 2 all have 8 screws on the bottom of the unit. The 4 and 5 also have the electrical warning stamped on the bottom of the PlayStation 2 case.SCPH 30001 v4 = Serial# begins with U0 SCPH 30001 v4 = Serial# begins with U1 SCPH 30001 v4 = Serial# begins with U2 SCPH 30001 v4 = Serial# begins with U3 SCPH 30001 v4 = Serial# begins with U4 SCPH 30001 v4 = Serial# begins with U5 SCPH 35001 v4 = GT3 Edition There are 3 different motherboards for the SCPH30001R - Version 4, 5 and 6 SCPH30001R v5 or v6 Motherboard SCPH39001= v7 SCPH50001 v9 or v10 (open machine and match boad to v9 or v10 diagram)

2 x 1200 Watts in 2-Ohm/2400 Watts in 4-Ohm bridged operation
2-channel, parallel or bridged mono operating modes for flexible application
Independent limiters for each channel offer dependable protection against distortion
Precise signal and clip LED indicators to monitor performance
Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies

Game Boy Advance FM Radio with Ear Buds !

The 360 LiteKey by Maximus is an advanced version of the Lite-On rebuild board, this little device serves as not only a rebuild PCB for the Lite-On 83850 V2 & 93450 V3, but it also acts as a Vampire spear as well, so all you need to do with the 360 LiteKey is install it and use the Xtractor Pro, or the 360 power unit from the USB Xtractor to then do a full firmware dump of your drive.

But that’s not the only function of this neat little invention, as some of you may know, when using the LT firmware on the Lite-On 83850 V2 & 93450 V3 drives, before you accept any updates for the 360 console you should really flash the firmware on your drive back to its original state before doing the update, this is where the Maximus 360 LiteKey really shines, because after installation there is no need to open the drive again to be able to do this, the 360 LiteKey can auto switch between operational mode or firmware extraction mode, where if you were using something like the standard Lite-On rebuild board, to flash the drive back to its original state you would need to open the drive and use the Vampire to make the full dump needed to finalize the process, with Maximus 360 LiteKey that’s a thing of the past, after the first install there is no need to ever open the drive again.

Features:

• Original Design Based On The Mra Concept
• Smart Mtk Mode, No Need To Open Drive To Flip Any Switch
• Rebuild Board At 100%
• Zero Intrusion To The Drive When In "Normal Mode"
• Undetectable When Placed In Disabled Mode
• Visual Mode Indicators
• Compatible With Latest Dosflash And Jungleflasher
• Disable/Re-Enable Without Opening Your Drive Case Again!
• Permanent-Enable Mode
• Minimal Current Consumption
• Quicksolder Pads (Noob Friendly)
• High Quality Materials