Allen & Heath Zone 62 Club Mixer Technical Specifications 0dBu = 0.775 Volts rms +4dBu = 1.23V rms 0dBV = 1 Volt rms -10dBV = 316mV rms Maximum output level XLR +26dBu into >2k ohm load TRS jack +21dBu into >2k ohm load RCA Phono +15dBu into >10K ohm load Internal headroom Channels +21dB Mix to output +23dB Peak indicators Turn on 5dB before clipping Meters MIX /MONITOR Peak hold 12 LED 3 colour STEREO CHANNEL Peak reading 4 LED 3 colour Frequency response 20Hz to 40kHz +0/-1dB Distortion THD+noise measured at +14dBu 1kHz < 0.006% Crosstalk channel shutoff measured at 1kHz < 90dB Noise measured rms 22Hz to 22kHz MIC EIN -128dB referred to 150 ohm source Residual output noise XLR -90dBu (-94dB S/N) TRS jack -84dBu (-84dB S/N) L RCA -92dBu (-84dB S/N) Mix noise, ch routed XLR -86dBu (-90dB S/N) TRS jack -82dBu (-82dB S/N) RCA Phono -91dBu (-83dB S/N) Power Supply Internal switch mode power unit with auto sensing mains input. MAINS IN socket IEC 3 pin Power lead Country dependent with moulded mains plug supplied AC mains 100 to 240V AC @ 50/60Hz Consumption 30W max Mains fuse rating 100-240V AC T500mA 20mm
Comes with FREE Molex to Sata Power Adapter and Bonus Wall Power Cable
This unit is great for powering your CK3 Pro or CK3 Lite so you do not need to plug it into your PC for power which makes it much easier!
100-240VAC (US/UK/EU) to 12v/5V DC Power Supply with 4 Pin Molex. This DC Power supply is a great addition to any PC techs toolkit. Hook up CK3's, fans, drives, cathodes or pretty much anything you want that has a Molex connector without having to take your PC apart.
Actual unit may be slightly different than the one pictured depending on the most current model available - features & functionality are identical. input: 100-240VAC, 50/60Hz,0.5A. Output: 12V-2A,5V-2A
Due to the power cord being different sockets for different countries, it is not supplied. It is a standard 3 pin power lead that is used on most PC's and electrical devices.
Please note: These adapters are originally made for powering hard drives / disc drives outside your computer so pin #2 is not grounded. Some devices (I.E cathodes) require pin 2 to be grounded. Please check your device before purchasing.