1-519-884-5545        Contact Us        Sign in

Xecuter LT Switch 1.5


Xecuter LT Switch 1.5

Details

Manufacturer
Weight
1.00 lbs
Manufacturer
2
Additional Info
5
Additional Pictures
10
Usage
15
Market price
$9.99
Our price
$2.95 (Save 70%) (US $2.95)
Quantity Price ()
10+ Items $1.95
*Note:

Options

Quantity


Installation is very simple and takes about 5 minutes if you have some experience with a soldering iron. It has been tested with the latest Jungle Flasher 0.1.73. All Liteon drive versions have been tested with 100% Success (Including the troublesome Winbond IC).

There is no need to remove the LT Switch after it has been installed - simply switch to normal mode and you are good to go. Even if you have to upgrade in the future - you don't have to touch the switch again ! Don't be fooled by more expensive copycat products.

This is the only solution you need to do a very simple job. Remember this product follows the K.I.S.S engineering principle (KEEP IT SIMPLE STUPID) :) The Only Liteon Solution Recommended By Team Jungle!

Features:

  • Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
  • Easy & Simple Install - Install Once & Forget
  • Enable / Disable Switch Multi-R Switch (18, 20, 22 Ohms)
  • On/Off LED Completely Undetectable
  • No Need To Uninstall
  • Works with ALL tools including the latest Jungle Flasher
  • Related Products

  • Customers Also Bought

  • Customer Reviews

  • Replacement Xbox 360 Lite-On DG-16D2S DVD Drive (74xxxC, 83xxxC, 93xxxC)

    IN STOCK

    These are a replacement LITEON DG-16D2S DVD drive for the Xbox 360, they are hard to get a hold of brand new as many sold online are refurbished from the factory.


    Features:

    • Quietest of all Xbox 360 drive types found in many consoles
    • Superb build quality and simplicity of design
    • Optical laser lenses are readily available, replaceable, affordable
    • Built-in safety module: no need to remove TSOP from PCB to recover bad flash
    • Drive boards can be re-flashed using JungleFlasher

     

    If you’re repairing for Xbox 360 consoles and need a solid for Xbox 360 replacement DVD drive, the LITEON DG-16D2S is the best option out there to date.

    Note about swapping XBox 360 DVD Drives:

    With all Xbox 360 DVD drives you need to extract the DVD key from your old drive's BIOS and flash that key into the drive you are replacing it with. You may also need to spoof the drive if you're not replacing a drive with the exact same brand or model. This is not a simple swap-out procedure and should only be performed by a competent technician.

    NO RETURNS FOR BUYING ERRORS FOR THIS ITEM.

    $29.95
  • Xecuter LT Switch v1.6

    This is the new 4 position resistor - 4th value details will be added shortly.

    This is the new Xecuter LT Switch v1.6 - the latest version in the #1 selling Xecuter LT Switch range.
    Xecuter has designed a simple switch for all the Liteon drives that enables firmware full read/write. They have also included an ON/OFF Led to show correct operation when switching to 0x72 vendor mode.
    Now Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)

    The installation is very simple and takes about 5 minutes if you have some small experience with a soldering iron. It has been tested with the latest Jungle Flasher 0.1.73. All Liteon drive versions have been tested with 100% Success (Including the troublesome Winbond IC). There is no need to remove the LT Switch after it has been installed - simply switch to normal mode and you are good to go. Even if you have to upgrade in the future - you don't have to touch the switch again !
    Don't be fooled by more expensive copycat products. This is the only solution you need to do a very simple job. Remember this product follows the K.I.S.S engineering principle (KEEP IT SIMPLE STUPID) :)
    The Only Liteon Solution Recommended By Team Jungle !
    Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
    Easy & Simple Install - Install Once & Forget
    Enable / Disable Switch
    Multi-R Switch (18, 20, 22 Ohms)
    On/Off LED
    Completely Undetectable
    No Need To Uninstall
    Works with ALL tools including the latest Jungle Flasher


    This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

    $5.95
  • iJust 2 Kit - e-cigarette

    iJust 2 Kit - e-cigarette

    IN STOCK

    Product Introduction:
    The iJust 2 kit, a starter e-cigarette kit by Eleaf, features the 5.5ml huge e-liquid capacity and 2600mAh battery capacity despite its simple appearance and light weight.

    The newly released iJust 2 Mini is a pocket-sized version of iJust 2 kit, having 2ml e-liquid capacity and 1100mAh battery capacity. Compact but yet efficient in every way, the iJust 2 Mini retains the unique atomizer base for better heat dissipation and side USB port design for convenient charging. When working with EC coils, it will bring you a great joy in vaping

    Standard configuration:
    1×iJust 2/iJust 2 Mini Mouthpiece
    1×iJust 2/iJust 2 Mini Atomizer Tube
    1×EC 0.3ohm Head
    1×iJust 2/iJust 2 Mini Atomizer Standard Base
    1×iJust 2/iJust 2 Mini Battery
    1×Airflow Control Ring
    1×USB Cable
    1×User Manual

    $17.99
  • Nokia Ear Piece

    Nokia Ear Piece ! The hands free with ear piece for the Nokia phones are a one piece unit that combines great clear audio quality with the convenience of an ultra compact hands free ear bud headset, designed to fit all ears. Plug the cord into the built in hands free jack on your phone, slip the ear bud easily into your ear, and start talking! If you wish, you can clip the microphone onto your clothing or let the cord hang freely. Plugs directly into your cell phone headset jack!Makes answering your Nokia 5110/ 5120/ 5125/ 5160/ 5165/ 5170/ 5180/ 5185/ 5190/ 6110/ 6120/ 6160/ 6160i/ 6161/ 6162/ 6168/ 6170/ 6180/ 6185/ 6188/ 7160/ 7190/ 8260 cell phone safe, fast and easy!
    $14.99
  • PIC18F USB Dev Kit

    The PIC18F4550 USB Dev Kit is loaded with features, including a large 32kb of program memory, optimized for C programs. The PIC18F4550 Development Board comes complete with the Microchip PIC18F4550 microcontroller pre-installed, together with the necessary crystal and power supply components, for a ready-to-run solution. Simply connect the power and download your program, using the easy to use programming interface and software, and your ready to start exploring the new PIC18 USB.

    PIC18F USB Dev Kit Programs can be downloaded or updated directly to the microcontroller using the USB in-circuit programming interface together with a suitable programmer or MPLabs HID Bootloader software.

    Now works with v3 Heremes!

    Pushbuttons and LED's are also included on our development board for testing and developing your code. This board is the ideal for applications requiring a USB Connection together with a large number of A/D inputs for monitoring and control.

    Our new PIC18F4550 Development board will get you started with an inexpensive, ready-to-run solution, which is ideal for the student or hobbyist.

     

    Instructions:

    • Download and install .Net Framework 4 and Visual C++ sofware.
    • Download and extract the HID Bootloader 2.6b software
    • Open the HID Bootloader 2.6b software Insert PIC18FUSB Device into a USB port on your Computer (XP, Vista or Win 7 32/64 OS)
    • Press and release the programming button on PIC 18F USB
    • PC should *ding* and load drivers for new USB device
    • Once PC has detected device the GUI will now allow you to "Open Hex File", select the HEX you want to program with.
    $3.88

Categories

Manufacturers

Recently Viewed