The 3 Beep and Yellow Light Error on the PS3 is similar to the 3 Red Light (Red Ring of Death) for the Xbox 360. What has happened is that the motherboard has warped and there is no longer a solid connection with the CPU and/or GPU.

We service these consoles with a professional Re-Ball of the motherboard, laying down fresh solder and ensuring the connection is solid. Then we apply a layer of our special foam padding beneath the motherboard to help prevent future warping.

Consoles with physical damage can't be repaired.
Comes with a 6-Month Warranty.

This service has approximately a 2-week turnaround from when the console is received.

Just purchase this service, select your shipping method at checkout and send in your PS3 console! We will repair it, fully test your console, and ship back via the shipping method you have already prepaid!

Please send the console only No Controllers, Cables etc...
We do require the hard drive inside the unit for testing purposes.

Use our return policy info to send your machine to us. Here is the link: http://www.gocybershopping.com/customer/help.php?section=returns

OUT OF STOCK

Replace your defective Laser to correct laser problems.

How to find out if your laser needs to be replaced:

• Games/movies take longer than normal to load
• Certain games do not load at all
• Games/movies flicker or jump
• Message: "Disc Read Errors"
• Disc appears damaged or dirty on the screen.

 

PS3 Model Laser Type Table

 

Hard Drive Capacity	80GB	80GB	60GB	40GB	40GB
Model Number	CECHL02	CECHK02	CECHC02	CECHH02	CECHG02
USB Ports	2	2	4	2	2
Release Date	11/2008	09/2008	11/2006	03/2008	11/2007
400AAA Laser	No	No	Yes	No	Yes
410ACA Laser	Yes	Yes	No	Yes	No

 

IN STOCK

The KES410ACA is quite a different looking laser lens for the Playstation 3 40GB console. It features two lenses on it's optical block. One of the KES410 lenses is used for blu-ray and the other is used for DVD/CD. The 410's lens setup really does add life to the Playstation 3 laser as it runs off two seperate coils - therefore reducing wear and tear between each laser wavelength.

Replace your defective Laser to correct laser problems.

How to find out if your laser needs to be replaced:

• Games/movies take longer than normal to load
• Certain games do not load at all
• Games/movies flicker or jump
• Message: "Disc Read Errors"
• Disc appears damaged or dirty on the screen.

 

PS3 Model Laser Type Table
(General guideline, may not be accurate)

Hard Drive Capacity	80GB	80GB	60GB	40GB	40GB
Model Number	CECHL02	CECHK02	CECHC02	CECHH02	CECHG02
USB Ports	2	2	4	2	2
Release Date	11/2008	09/2008	11/2006	03/2008	11/2007
400 Laser	No	No	Yes	No	Yes
410 Laser	Yes	Yes	No	Yes	No

 

ARDUINO UNO REV3

IN STOCK

 

Overview

Arduino Uno is the ideal board for getting started with electronics, through fun and engaging hands-on projects. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. Arduino Uno Rev3 is the most used and documented board in the Arduino family.  Thanks to the lively and helpful community surrounding  the Arduino Uno, no one will find themselves without support.

Technology

Arduino Uno Rev3  is a microcontroller board based on the ATmega328P, an 8-bit microcontroller with 32KB of Flash memory and 2KB of RAM. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno board is the first in a series of USB boards and it is the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Comparison Page.

Specifications

Microcontroller	ATmega328P
Operating voltage	5v
USB	14
Digital I/O Pins	6
Analog Input Pins	6
Flash Memory	32 KB
SRAM	2 K
EEPROM	1 K
Clock Speed	16 MHz
Length	68.6 mm
Width	53.4 mm
Weight	25 g

Documentation

The Uno is open-source hardware! These are the relevant files:

Schematics - Reference Design - Board size

 If you want more information about programming the Arduino Uno or how to interface hardware with it, please go to the Product Page.

Arduino Uno Rev3 is programmed, as all the other Arduino boards  with the Arduino Software (IDE) that you can download for free.

Simple conversion kit for all DemoN Phat SB 16MB NAND so you can install to any BB 256/512MB without having to buy a new version DemoN.

Gamecube Organizer (black)! With the Gamecube Organizer you can store and protect all your beloved Cube belongings easily. 10 trays for your Cube games allow you a safe and dust free storage. Additionally space for 4 memory cards as well as some other items is built-in. Available in purple and black color.