Comes with FREE Molex to Sata Power Adapter and Bonus Wall Power Cable
This unit is great for powering your CK3 Pro or CK3 Lite so you do not need to plug it into your PC for power which makes it much easier!
100-240VAC (US/UK/EU) to 12v/5V DC Power Supply with 4 Pin Molex. This DC Power supply is a great addition to any PC techs toolkit. Hook up CK3's, fans, drives, cathodes or pretty much anything you want that has a Molex connector without having to take your PC apart.
Actual unit may be slightly different than the one pictured depending on the most current model available - features & functionality are identical. input: 100-240VAC, 50/60Hz,0.5A. Output: 12V-2A,5V-2A
Due to the power cord being different sockets for different countries, it is not supplied. It is a standard 3 pin power lead that is used on most PC's and electrical devices.
Please note: These adapters are originally made for powering hard drives / disc drives outside your computer so pin #2 is not grounded. Some devices (I.E cathodes) require pin 2 to be grounded. Please check your device before purchasing.
A simple template to mark the spot for that Kamikaze UNLOCK
New from Team Xecuter. Ever needed fast molex power and you can't get your hands on a power supply ?
This handy cable provides a full 5V from your USB port to a Molex connector giving you full power to be able to update the firmware on your 360 DVD Drive.
You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great cable thats useful in any modders toolkit.
This unlocking kit, made for Xbox 360 SLIM cases, allows you to open your SLIM console for repairs and installations.
The Torx T8/T10 hex key allows you to easily remove Xbox 360 slim case.
This tool kit is ideal for any SLIM model, or anyone just looking to repair their broken system. This is the one tool kit you will ever need to solve your case unlocking issues.
Team Maximus releases the Stinger 3.0L to RGH your XBox360 PHAT and SLIM (Trinity)
Fast RGH 2 glitcher chip.
New Model 3.0L (with crystal for Corona compatibility) PAD by PAD compatible with last Stinger 2.0, it uses same .jed or .xsvf files, the improvement are:
To use the 68nf capacitor for stubborn PHAT consoles just bridge the J68NF jumper and add a Ground wire on the AVG pad to the AV port.
The SLIM program works on all TRINITY boards.
The PHAT program works on all HDMI models (Falcon, Zephyr, Jasper), and once programmed the model is chosen by setting the onboard solder jumpers.
Chips can be reprogrammed using NANDFLASHER (updated to nandpro 3.0) or any JTAG cable.
Hardware is the same for PHAT and SLIM. It is only the on-board program which can of course be changed later by the end user if needed.