ETA NOV 14/12
The Xecuter 1/2 PMT CK3 Probe v3 conversion cable will convert ANY Probe v1, v2, v2.1 or mini-probe to a fully working CK3 Probe 3. A superb choice for previous customers who can now use their old probes to upgrade without having to pay the full amount for a Probe v3!
Comes with FREE Molex to Sata Power Adapter and Bonus Wall Power Cable
This unit is great for powering your CK3 Pro or CK3 Lite so you do not need to plug it into your PC for power which makes it much easier!
100-240VAC (US/UK/EU) to 12v/5V DC Power Supply with 4 Pin Molex. This DC Power supply is a great addition to any PC techs toolkit. Hook up CK3's, fans, drives, cathodes or pretty much anything you want that has a Molex connector without having to take your PC apart.
Actual unit may be slightly different than the one pictured depending on the most current model available - features & functionality are identical. input: 100-240VAC, 50/60Hz,0.5A. Output: 12V-2A,5V-2A
Due to the power cord being different sockets for different countries, it is not supplied. It is a standard 3 pin power lead that is used on most PC's and electrical devices.
Please note: These adapters are originally made for powering hard drives / disc drives outside your computer so pin #2 is not grounded. Some devices (I.E cathodes) require pin 2 to be grounded. Please check your device before purchasing.
Opening your Xbox 360 case can be really tricky without a tool kit such as this, just because of the way the case is designed and that all points need to be depressed at once to open the case, so this is why Xecuter made this Xbox 360 case unlock kit v2 to make the job of opening up the Xbox 360 case that much easier and quicker, no more messing around and running the risk of damaging your Xbox 360 case, just use the case opening tool and right away you will have your console open for servicing safely.
PRE-ORDER! ETA: TBA (CHECK XECUTER.COM FORUMS FOR MORE INFO!)
7/24/14 update: Testing completed! And we think Production is near completion, still no official date as to when Pre-orders will be filled. (via Team-Xecuter.com Forums member RF1911, official post --> here <--)
More details to be announced!
This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity. Opening your Xbox 360 renders your warranty null and void. You should not attempt to repair your Xbox 360 unless it is no longer under warranty, or else you do NOT intend to use your warranty. MODCHIPCENTRAL.COM is not responsible for any damage done to your Xbox 360 or any other devices that you may use with this kit. Please do not attempt to repair your Xbox 360 unless you have experience working with computer hardware.
Xbox & Xbox 360 are registered trademarks by Microsoft Corporation. No affiliation between the TEAM XECUTER or MODCHIPCENTRAL.COM and Microsoft Corporation exists or is implied.
PRE-ORDER! SHIPPING MID-OCTOBER*
*DATE SUBJECT TO CHANGE WITHOUT NOTICE. NO REFUNDS ON PREORDERS. NO EXCEPTIONS.
SAVE $10 IF YOU ORDER THIS AS AN ADDON TO ANY COBRA ODE!
(NOTE: discount will not work if ordered separately.)
Pictured below is the new DMC module for PHAT PATA, SATA PHAT, 2k, 2k5 and 3k consoles which enables use of all versions of Cobra ODE (3.xx/4.xx and 5.xx) on 4.60 OFW. A swap disc is required in line with current usage of Cobra ODE on OFW 4,60 and 4k consoles.
The DMC module has an Actel FPGA on board which controls the optical lens' units disc eject motor, thus enabling the user to insert and remove discs without detection by the drive controller. The onboard FPGA is linked to a USB PHY which enables full reprogramming of the FPGA at any time via USB connected to your PC.
The Cobra DMC connects to the Cobra ODE (all models) via the JTAG 24 pin FFC port on the Cobra ODE and the "main" port on the Cobra DMC. Cables are included.
The Cobra DMC can be mounted adjacent to the optical drive of the PS3. The module then connects to the eject motor inside the drive, without soldering via FFC cables.
For more info visit:
More details to come!
*not official artwork
SHIPPING MID-JULY TO LATE AUGUST*
*DATE SUBJECT TO CHANGE WITHOUT NOTICE
Wiikey U is an Optical Disk Drive Emulator (ODE). Once installed between the motherboard and DVD drive, it allows the user to either emulate games as ISOs from removable storage media - or use the WiiU in normal (passthrough) mode.
Wiikey U does not rely on CFW or any particular original firmware. The console can be updated and used normally. When installing Wiikey U for the first time the unique drive key for the console has to be obtained - which only needs to be done once - and can be done with software.
Wiikey U is the first solderless ODE modchip for the WiiU on the market.
More official details to be announced!