1-519-884-5545        Contact Us        Sign in

Xecuter Sputnik 360 Liteon DG-16D4S Unlock Probe


Xecuter Sputnik 360 Liteon DG-16D4S Unlock Probe



Details

Manufacturer
Weight
1.00 lbs
Additional Info
Additional Pictures
n/a
Usage
n/a
Market price
$19.95
Our price
$12.95 (Save 35%) (US $12.95)

Options

Add CK3 Extended Power Cable?
Add Sputnick360 PCB Add-on?
Quantity


IN STOCK

 

The SPUTNIK360 Unlock Probe is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.

Yet another simple and useful device from Team Xecuter.

  • Enable write mode on Liteon DG-16D4S (MXIC) DVD Drives
  • Easily repair your Xbox 360 S Console
  • No lengthy Microsoft warranty repair delays
  • Easy to use - takes minutes !
  • 1 easy trace cut required
  • Multiple Resistor options to ensure compatibility
  • Works on all MXIC SPI's (9504, 0272, 0225 & 0401)
  • Tested with firmware tools such as JungleFlasher

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support  nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

  • Related Products

  • Customers Also Bought

  • Customer Reviews

  • Xecuter CK3 Probe III V3 for Liteon 74850 83850 93450 (No Cut, No Solder Addon) - Team Xecuter

    IN STOCK

    NEED AN IMMEDIATE SOLUTION TO FLASH YOUR LITE-ON DG-16D2S DRIVE?
    USE THE Maximus Scorpion V2!

    This is targeted to installers who require a multi-use no cuts and no solder solution to the all the Liteon DG-16D2S drives for easy DVD Key extraction. A complete all-in-one solution. Installers can use this kit again and again and again !

    The CK3 Probe 3 can be used with all CK3 Connectivity kits and the X360USB PRO.

    • The Best Solution For ALL Liteon DG-16D2S Drives including no trace cuts and no soldering
    • Professional PMT based device
    • Includes extended CK3 power cable with power reset button
    • Power / Status LED
    • Fully Compatible with Jungle Flasher

    The CK3 Probe 3 can be used with all CK3 Connectivity kits and the X360USB PRO.

    • The Best Solution For ALL Liteon DG-16D2S Drives including no trace cuts and no soldering
    • Professional PMT based device
    • Includes extended CK3 power cable with power reset button
    • Power / Status LED
    • Fully Compatible with Jungle Flasher
    - See more at: http://www.xconsoles.com/products/xecuter-ck3-probe-3.html#sthash.Z7GJ3ARr.dpuf

    This is targeted to installers who require a multi-use no cuts and no solder solution to the all the Liteon DG-16D2S drives for easy DVD Key extraction. A complete all-in-one solution. Installers can use this kit again and again and again !

    The CK3 Probe 3 can be used with all CK3 Connectivity kits and the X360USB PRO.

    • The Best Solution For ALL Liteon DG-16D2S Drives including no trace cuts and no soldering
    • Professional PMT based device
    • Includes extended CK3 power cable with power reset button
    • Power / Status LED
    • Fully Compatible with Jungle Flasher
    - See more at: http://www.xconsoles.com/products/xecuter-ck3-probe-3.html#sthash.Z7GJ3ARr.dpuf
    $14.95
  • x360Key / XK3Y-R Rev 7-2 (v1.1) - Solderless USB loader + Free MicroSD Reader

    IN STOCK

    As of October 1/13 ALL XK3Y orders are shipped as "XKR" (xk3y Reloaded)

    All Xk3y features are now working with Trinity and Corona consoles & HItachi Slim drives (0500 & 0502). This requires Xell data (CPU Key) and two files from your NAND.

    Your order will ship the same day if ordered before 3:00PM Central time!

    English version and R7-2 (v1.1)

    CONTENTS:

    • 1x xk3y XK-R v1.1 Main Board
    • 1x Micro SD card
    • 1x SATA Cable
    • 1x Molex Power Cable
    • 1x FC/USB Dongle (can also be ordered separately)
    • 1x Short FC Cable (can also be ordered separately)
    • 1x Long FC Cable (can also be ordered separately)
    • 1x xk3y XK-R Main board protection card

    Optional:

    • xk3y Remote/LCD v2 (also compatible with PS3 3k3y!)
    • xkey WiFi USB Dongle: navigate your ISOs from your smart device!
    • Installation service for PHAT, SLIM DG-16D4S, SLIM DG-16D5S** (PLUS RGH + 1175 REPLACEMENT PCB)

    ** not sure which version SLIM you have? Go by the sound the drive makes. Check this link for more info:

    team-xecuter.com/forums/showthread.php/98681-When-did-DG-16D5S-replace-16D4S?p=713972&viewfull=1#post713972

    As well, here is our newest install video of the X360key R7-2 version via ModChipCentral.com

    If you are interested in Wholesale prices, please email us with your location and Quantity!

    The x360key is an awesome product that will allow you to play games from a USB hard drive!

    Right here, right now:

    • User friendly: intuitive interface, no soldering required
    • Compatible with all fat Xbox 360 models, and 9504 and 0225 Slim models
    • Supports most file systems, including NTFS, EXT2/3/4, and Mac OS X Extended
    • High speed USB2 interface
    • Stylish USB control pad for selecting games and controlling your x360key
    • Powerful embedded Linux system running from Micro SD card (included)
    • Linux firmware fully updatable from USB media
    • FPGA fully updatable from USB media via built-in, in-system JTAG programming
    • Recovery mode - it is always possible to recover from a bad flash
    • No drive flashing or JTAG hack required
    • AP25 protection emulation


    Work in progress:

    • Support for all slim Xbox 360 models
    • Loading games from NFS and Samba shares (requires Wifi dongle which will be sold seperately

    Video of X360key/xK3y/xKey running on Xbox Live

    Which 360 Consoles are compatible at launch?

    Fat or Slim Console? 360 DVD Drive Type Compatible?
    Fat Samsung (All) Yes
    Fat Hitachi (All) Yes
    Fat BenQ Yes
    Fat Liteon (All) Yes
    Slim Liteon 9504 (0272) Yes
    Slim Liteon 0225 Yes
    Slim Liteon 0401

    Yes

    Slim Liteon 1071

    Yes

    Slim Hitachi 0500 Nopossible through RGH
    Slim

    Liteon 1175
    (16D5S)

    NoPossible through RGH.

    Newer methods coming soon! stay tuned

     

    Please note that the xk3y will not have Key extraction technology. So please only order if you have a way of dumping your original firmware. This is important! Firmware.bin  for fat, and dummy.bin for Slims


    Requirements: A dump of the original Xbox 360 DVD drive firmware to configure xKey, you can use TX USB PRO V2 to retrieve it. Check this chart to see if your DVD drive is compatible with xKey. Also, if you are installing xKey yourself we recommend adding the V2 remote display to your order for easy install and usage.

     

    DOWNLOAD THE PAPER COVERS HERE:

    $69.95
  • Sputnik 360 SPI Unlock Probe PCB Add-on

    IN STOCK

    Never solder/unsolder the trace cut again!

    When using a Sputnik Probe you have to repair the trace when you have finished programming, and if you ever need to flash the drive again you would have to de-solder.

    This simple PCB add-on enables you to solder the board once and then thats all you will ever need to do. The simple switch will open / close the circuit and there is an extra large pad to use when probing for when you need to unlock the SPI.

    Open / Close trace cut without further soldering
    Large pad for easy probing
    Easy to install - takes minutes!

    NOTE: This is NOT the SPUTNIK360 - Liteon DG-16D4S DVD Unlock Switch, this is an addon product for the SPUTNIK360 PROBE and will not unlock the SPI without the use of the Probe.

    This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

    $1.95
  • Xecuter POST QSB For Xbox 360 Slim

    IN STOCK

    Those that have fitted a CoolRunner to an Xbox Slim will be no stranger to the fact that it can take a great deal of trial and error to get the optimized boot times down to less than 5 seconds. The main issue is the CPU_RST wire which has to be up to 50cm long and then coiled underneath the motherboard. In many cases the positioning of the coil is a factor due to signal interference. Then you have to try different lengths, 40cm, Xecuter has developed a simple yet elegant solution for this problem. Using the process of serpentining, Xecuter has designed a QSB PCB for the Xbox 360 slim that fits neatly into place, giving you an optimized solution enabling you to select several different lengths without having to cut any wires and eliminates any guess work and possible signal interference issues. Simply cut the blue CPU_RST wire to 8cm and then you can select from 50cm, 47cm, 41cm, 38cn, 35cm, 32cm & 29cm.

    $1.95
  • iBlazr - Mobile LED Flash for iPhone, iPad, Android and Windows Phone! - BLACK edition

    FLASH FOR YOUR
    SMARTPHONE

    The iBlazr LED flash help dramatically improve the quality of photos and video you take with your iPhone, iPad, Android or Windows phone in low-light situations. It easily plugs into the headphone port of the device and has its own battery, so it doesn't drain the power of your smartphone—yet has enough power to take up to 500 photos before needing a recharge.

    GENTLE LIGHT FOR YOUR SELFIES
    iBlazr flash takes your selfies to the next level with a soft beam of light controlled by a smart app.

    Download the app here!

    TRY EVEN BETTER
    PHOTOGRAPHY

    • Natural skin tones
    • Mild shadows
    • Diffused light
    • Infinite depth
    • Full-featured frame covering

     

    VIDEO LIGHT FOR
    EVERYDAY OCCASIONS


    Shoot fully lighted videos on your iOS, Androids and Windows Phone using the companion app. iBlazr provides a vivid constant light that useful for short night videos and brief interviews.

    KEY VIDEO FEATURES
     

    • Constant light mode
    • Adjustable brightness
    • No red-eye effects
    • 5600K light temperature
    • 70-degree beam angle
    • Free companion app
    In the Box

    TECHNICAL SPECS


    What inside:
    1. We know that smartphone users want small, light, yet, functional accessories. That is why we made unbelievably small housing with plastic or premium aluminium finishing.
    2. 4 High-power LEDs and 70 degree optics of our own design… Means uncompromised amount of light! Beauty outside, beast inside!
    3. 3.5mm audio jack means iblazr can be used with, literally any smartphone and tablet on the market.

    LIGHT AND DIMENSIONS

    Dimensions

    Height: 27 mm (1 inch)
    Width: 32 mm (1.25 inch)

    Depth: 9 mm (0.35 inch)
    Weight: 10 grams

    Light

    70-Degree beam
    5600 K Color temperature
    >80 CRI

    Battery

    Built-in rechargeable lithium-ion battery
    Charging via USB to computer system or power adapter

    • Capacity – 110 mAh
    • Up to - 500 flashes

    Constant light mode:

    • 1st Power mode – up to 3 hours
    • 2nd Power mode - up to 50 minutes
    • 3rd Power mode - up to 25 minutes

    Sleep Mode – Up to three month

    Cold Shoe Mount

     

    • Makes iblazr the smallest Constant
    • LED light for DSLR and compact camera


    Compatible with classic shoe mount on :

    • Canon EOS and PowerShot series
    • Nikon D series
    • Sony NEX and RX series
    • Samsung NX and others

    Power Output:

    Off-smartphone Constant Light Modes:
    • 1st Power mode – 16 Lux at 1 m (similar to
      smartphone flashlight)
    • 2nd Power mode – 60 Lux at 1 m
    • 3rd Power mode – 120 Lux at 1 m
    Smartphone usage:

    Flash mode – up to 270 Lux at 1 m
    Constant light mode- Dimmable 0% to 100%

    Sensors:

    Thermo sensor (preventing from overheat)

    Battery controller (check the battery level by pushing
    the button for three sec)

    Light Controller (measuring ambient light)

    Flexible Charger

    Perfect for:
    • iblazr Stand
    • Macro Photography
    • Reading light
    • Keyboard lightning

    Length – 42cm (16.5 inches)
    Chargers iblazr during 1st Power Mode
    (can be use as a lamp)

     

     

     

     

     

     

     

     

     

     

    Warning: DO NOT insert the earphones or any other 3.5 mm connector into the Flexible iblazr Charger!

    For more information about the iBlazr visit the official website at http://iblazr.com/int/faq

    $19.95
  • Nokia Ear Piece

    Nokia Ear Piece ! The hands free with ear piece for the Nokia phones are a one piece unit that combines great clear audio quality with the convenience of an ultra compact hands free ear bud headset, designed to fit all ears. Plug the cord into the built in hands free jack on your phone, slip the ear bud easily into your ear, and start talking! If you wish, you can clip the microphone onto your clothing or let the cord hang freely. Plugs directly into your cell phone headset jack!Makes answering your Nokia 5110/ 5120/ 5125/ 5160/ 5165/ 5170/ 5180/ 5185/ 5190/ 6110/ 6120/ 6160/ 6160i/ 6161/ 6162/ 6168/ 6170/ 6180/ 6185/ 6188/ 7160/ 7190/ 8260 cell phone safe, fast and easy!
    $14.99
  • PIC18F USB Dev Kit

    The PIC18F4550 USB Dev Kit is loaded with features, including a large 32kb of program memory, optimized for C programs. The PIC18F4550 Development Board comes complete with the Microchip PIC18F4550 microcontroller pre-installed, together with the necessary crystal and power supply components, for a ready-to-run solution. Simply connect the power and download your program, using the easy to use programming interface and software, and your ready to start exploring the new PIC18 USB.

    PIC18F USB Dev Kit Programs can be downloaded or updated directly to the microcontroller using the USB in-circuit programming interface together with a suitable programmer or MPLabs HID Bootloader software.

    Now works with v3 Heremes!

    Pushbuttons and LED's are also included on our development board for testing and developing your code. This board is the ideal for applications requiring a USB Connection together with a large number of A/D inputs for monitoring and control.

    Our new PIC18F4550 Development board will get you started with an inexpensive, ready-to-run solution, which is ideal for the student or hobbyist.

     

    Instructions:

    • Download and install .Net Framework 4 and Visual C++ sofware.
    • Download and extract the HID Bootloader 2.6b software
    • Open the HID Bootloader 2.6b software Insert PIC18FUSB Device into a USB port on your Computer (XP, Vista or Win 7 32/64 OS)
    • Press and release the programming button on PIC 18F USB
    • PC should *ding* and load drivers for new USB device
    • Once PC has detected device the GUI will now allow you to "Open Hex File", select the HEX you want to program with.
    $3.88

Categories

Manufacturers

Recently Viewed