Get your Xbox 360 modded with the JTAG/RGH CoolRunner installation!
This allows you to boot homebrew software as well as use an alternate dash.
WE can do any console with an hdmi port and any Dashboard!!!
The purpose of this modification is to let console owners boot open source and homebrew applications on their Xbox 360 Console.
Features of JTAG
IF YOU SUPPLY THE HARD DRIVE, WE'LL INSTALL THE SOFTWARE!
OTHERWISE YOU NEED A HARD DRIVE WE ONLY HAVE 1TB HDD'S FOR AN ADDITIONAL $199.99.
NOTE: All models of PHAT Xbox 360 can be done except the Xenon. The image below shows how to determine which motherboard is inside your console, from checking the power socket on the console.
PLEASE READ OUR RETURN POLICIES WHEN SHIPPING YOUR XB360 CONSOLE TO US!
We do not promote or condone and are completely against software piracy! Graphic artists and software programmers and engineers work very hard, day and night, to bring you all the latest and greatest games. They very well deserve to be paid for their outstanding efforts. Which as you can see in all of today's games they are just at the edge of full on, deeply immersive and emotionally integrated virtual reality! If you truly enjoy a game, please go out and buy it!
OUT OF STOCK AS OF APRIL 10 - ETA END OF APRIL*
*DATE SUBJECT TO CHANGE WITHOUT NOTICE
ALL E3 Flashers Kits are sold with European power supply adapters. Power conversion adapters for US/Canada power sold separately.
If you are outside North America, shipping may be slightly more than as shown on our website due to the weight of the E3 Flasher being 3lbs. You will be contacted to pay for additional shipping.
You will also need a downgrade dongle such as the E3 Card Reader AVR to perform the downgrade.
Warning. This product is not 'hard' to install, but is very easy for you to stuff up your console. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.
Please note that you have to make sure the clip is perfectly flush with the motherboard before you press it down. The majority of the issues lie with improper installation of the clip. If the clip is uneven before you press it down, it will slightly bend the pins on the bottom of the clip.
This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from 4.55 to 3.55! You have to make sure the PS3 originally came with 3.55 firmware or lower from factory.
This device is only for consoles with NOR flash, not NAND at the moment
Here is a great installation video:
These are the pre-packaged contents for the E3 Flasher complete kit. If you see resellers/distributors selling for less, it's because they are not selling the package with everything seen below.
This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering! As well, the plug that they include with the sata dock is not North American.
Please double check to make sure it works with your PS3 as we will not issue refunds if it is not compatible with your PS3 after it has been installed.
Watch the Official E3DIY Video: