1-519-884-5545        Contact Us        Sign in

E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak


E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak

  • E3 Flasher Dual Boot PS3 PlayStation3 Downgrader & Jailbreak
  • E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak


Details

Manufacturer
Weight
3.00 lbs
Manufacturer
Additional Info
Additional Pictures
n/a
Usage
n/a
Market price
$99.95
Our price
$49.95 (Save 50%) (US $49.95)

Options

Add E3 Reader to downgrade?
Quantity


IN STOCK

UPDATE: TEAM E3 HAS REPLACED THE ORIGINAL ESATA DOCKING STATION WITH A NEW ESATA HDD ADAPTER WITH SMALLER FORM FACTOR. AS OF 5.20.14 YOU RECEIVE THESE IN SMALLER PACKAGING FROM THE E3 TEAM!

ALL E3 Flashers Kits are sold with European power supply adapters. Power conversion adapters for US/Canada power sold separately.

If you are outside North America, shipping may be slightly more than as shown on our website due to the weight of the E3 Flasher being 3lbs. You will be contacted to pay for additional shipping.

You will also need a downgrade dongle such as the E3 Card Reader AVR to perform the downgrade.

Warning. This product is not 'hard' to install, but is very easy for you to stuff up your console. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.

Please note that you have to make sure the clip is perfectly flush with the motherboard before you press it down.   The majority of the issues lie with improper installation of the clip. If the clip is uneven before you press it down, it will slightly bend the pins on the bottom of the clip.

This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!  

This device is only for consoles with NOR flash, not NAND at the moment.  (Doesn't work on Slim 3000 or superslim consoles)

Here is a great installation video:

These are the pre-packaged contents for the E3 Flasher complete kit. If you see resellers/distributors selling for less, it's because they are not selling the package with everything seen below.

 



NOTE: NEW E3 ESATA DOCKING STATION REPLACED BY SMALLER E3 ESATA USB HDD ADAPTER!

This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering!  As well, the plug that they include with the sata dock is not North American.

Please double check to make sure it works with your PS3 as we will not issue refunds if it is not compatible with your PS3 after it has been installed.

Watch the Official E3DIY Video:

  • NOR FLASH ON board
  • 3 save MODE
  • 1 KEY backup or restore, simplicity is best
  • Compatible with all PS3 console - FAT models require soldering
  • Integrated interface varieties, perfect extension, will have more functions with future E3 accessories
  • Related Products

  • Customers Also Bought

  • Customer Reviews

  • E3 NOR Flasher - Downgrader

    IN STOCK

    The E3 NOR Flasher - Downgrader works same as the E3 Flasher COMPLETE Ltd. and includes 4 components: mainboard, cover board, CLIP with softboard, and metal cover.

    The E3 NOR Flasher - Downgrader is also included in the E3 Flasher Ltd. Complete kit.

    The E3 NOR Flasher - Downgrader works on all NOR flash consoles and no soldering.

    Features:

    • Designed to help you program NAND and NOR flash data
    • The simplest way to help you get all function with one key operation without any PC software
    • Easy upgradable from TF card and PC USB
    • No need connect to PC to save data on E3 flasher or TF card in few min with 16M Nor flash memory on board
    • Specifically designed for PS3 and allows user install and operation easier, and even get more function like dual boot
    • Compatible with host version CECH-2500 or below
    • This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!  

      This device is only for consoles with NOR flash, not NAND at the moment.  (Doesn't work on Slim 3000 or superslim consoles)

    Contents:

    • Mainboard
    • Cover board
    • Clip with softboard
    • Metal cover

    Recommended:

    $24.95
  • X3Max USB Development Kit

    The X3Max is a revolutionary USB development board. The X3Max has a 32bit MCU (processor) and 128KB of memory in which to store user hex, these features are unparalleled and not available in any other USB development board. This powerful hardware specification provides the extensibility required to ensure a future proof solution that will be able to keep up with the latest advances in code development. The X3Max also has an inbuilt MicroSD(HC) slot which provides even further expandability!

    With the custom X3Tool programming/flashing software, simple tasks such as uploading hex to the X3 Max are extremely simple as showed in our guide, no drivers are required, simply download the X3Tool software, plug the X3Max in to your computer and flash!

    While the X3Max is very simple to use for the end user who just wants to upload pre-made hex to the board, the combination of the powerful X3Max hardware and X3Tool software means that tasks undertaken by developers and advanced users such as editing the payload can be done right from within the X3Tool software! No complicated multi-software solutions are required.

    The X3Max comes complete in a sturdy plastic presentation case along with a free screwdriver used to open the casing. THIS DOES NOT WORK ON FIRMWARE 3.42 OR ABOVE UNTIL A NEW EXPLOIT/METHOD IS FOUND!

    Features :

    • The X3Max is compatible with all models and regions including: USA, JAP, PAL, and Korea.
    • Compatibile with FAT and SLIM PS3s
    • The X3Max has 128kb of program memory
    • The X3Max is a 32bit processor
    • The X3Max has 16K RAM
    • The X3Max is expandable with expansion port - Onboard microSD Slot (will support 32GB SDHC) for future programming capabilities!
    • Installing the X3Max is as easy as plugging in a USB flash drive, the process is completely solderless and does not void your warranty.
    • The X3Max an open source project and therefore is compatible with all third party developers firmware. All Official builds are tested thoroughly by our team before released to ensure they are stable and bug free.
    • Open up your console to a new generation of homebrew applications
    • Load homebrew apps/games off any USB hard drive/flash drive
    • Fully updatable with new features/updates by connecting X3 Max to any computers USB port
    • Frequent updates by our team and other members of the community combined with X3Tool V2 makes the update process easy, even for novices.

      For the gamer!
    • X3Max has an easy to use Firmware updater that will soon be available for multiple OS.
    • X3Max team provides pre-compiled, tested and certified firmware files that you can trust to run on your X3Max.

      For the Homebrew Developer!
    • X3Max has a simple Payload Editor Application that makes it easy to edit and add custom payloads.
    • X3Max has built-in debugging including USB protocol analyzer so you can easily troubleshoot your payloads.
    $8.95
  • 37 in 1 sensors kit for Arduino

    37 in 1 sensors kit for Arduino

    IN STOCK

     

    Kit contains:

    1.    JoyStick

    2.    Flame Sensor

    3.    RGB LED

    4.    Heartbeat Sensor

    5.    Light Cup

    6.    Hall Magnetic Sensor

    7.    Relay

    8.    Linear Hall Sensor

    9.    SMD RGB

    10.7 Color Flash

    11.Tilt Switch

    12.Temperature Sensor

    13.Big Sound Sensor

    14.Touch Sensor

    15.Two-Color LED

    16.Laser Emitter

    17.Ball Switch

    18.Analog Temperature Sensor

    19.Small Sound Sensor

    20.Digital Temperature Sensor

    21.Two-Color LED (small)

    22.Button

    23.Photoresistor

    24.IR Emission

    25.Tracking Sensor

    26.Buzzer

    27.Reed Switch

    28.Shock Sensor

    29.Temperature And Humidity Sensor

    30.IR Receiver

    31.Avoidance Sensor

    32.Passive Buzzer

    33.Mini Reed

    34.Rotary Encoders

    35.Analog Hall Sensor

    36.Tap Module

    37.Light Blocking

    $29.95
  • iJust 2 Kit - e-cigarette

    iJust 2 Kit - e-cigarette

    IN STOCK

    Product Introduction:
    The iJust 2 kit, a starter e-cigarette kit by Eleaf, features the 5.5ml huge e-liquid capacity and 2600mAh battery capacity despite its simple appearance and light weight.

    The newly released iJust 2 Mini is a pocket-sized version of iJust 2 kit, having 2ml e-liquid capacity and 1100mAh battery capacity. Compact but yet efficient in every way, the iJust 2 Mini retains the unique atomizer base for better heat dissipation and side USB port design for convenient charging. When working with EC coils, it will bring you a great joy in vaping

    Standard configuration:
    1×iJust 2/iJust 2 Mini Mouthpiece
    1×iJust 2/iJust 2 Mini Atomizer Tube
    1×EC 0.3ohm Head
    1×iJust 2/iJust 2 Mini Atomizer Standard Base
    1×iJust 2/iJust 2 Mini Battery
    1×Airflow Control Ring
    1×USB Cable
    1×User Manual

    $17.99
  • Maximus 360 Litekey

    The 360 LiteKey by Maximus is an advanced version of the Lite-On rebuild board, this little device serves as not only a rebuild PCB for the Lite-On 83850 V2 & 93450 V3, but it also acts as a Vampire spear as well, so all you need to do with the 360 LiteKey is install it and use the Xtractor Pro, or the 360 power unit from the USB Xtractor to then do a full firmware dump of your drive.

    But that’s not the only function of this neat little invention, as some of you may know, when using the LT firmware on the Lite-On 83850 V2 & 93450 V3 drives, before you accept any updates for the 360 console you should really flash the firmware on your drive back to its original state before doing the update, this is where the Maximus 360 LiteKey really shines, because after installation there is no need to open the drive again to be able to do this, the 360 LiteKey can auto switch between operational mode or firmware extraction mode, where if you were using something like the standard Lite-On rebuild board, to flash the drive back to its original state you would need to open the drive and use the Vampire to make the full dump needed to finalize the process, with Maximus 360 LiteKey that’s a thing of the past, after the first install there is no need to ever open the drive again.


    Features:

    • Original Design Based On The Mra Concept
    • Smart Mtk Mode, No Need To Open Drive To Flip Any Switch
    • Rebuild Board At 100%
    • Zero Intrusion To The Drive When In "Normal Mode"
    • Undetectable When Placed In Disabled Mode
    • Visual Mode Indicators
    • Compatible With Latest Dosflash And Jungleflasher
    • Disable/Re-Enable Without Opening Your Drive Case Again!
    • Permanent-Enable Mode
    • Minimal Current Consumption
    • Quicksolder Pads (Noob Friendly)
    • High Quality Materials
    $5.95

Categories

Manufacturers