1-519-884-5545        Contact Us        Sign in

E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak


E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak

  • E3 Flasher Dual Boot PS3 PlayStation3 Downgrader & Jailbreak
  • E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak


Details

Manufacturer
Weight
3.00 lbs
Manufacturer
Additional Info
Additional Pictures
n/a
Usage
n/a
Market price
$99.95
Our price
$49.95 (Save 50%) (US $49.95)

Options

Add E3 Reader to downgrade?
Quantity


IN STOCK

UPDATE: TEAM E3 HAS REPLACED THE ORIGINAL ESATA DOCKING STATION WITH A NEW ESATA HDD ADAPTER WITH SMALLER FORM FACTOR. AS OF 5.20.14 YOU RECEIVE THESE IN SMALLER PACKAGING FROM THE E3 TEAM!

ALL E3 Flashers Kits are sold with European power supply adapters. Power conversion adapters for US/Canada power sold separately.

If you are outside North America, shipping may be slightly more than as shown on our website due to the weight of the E3 Flasher being 3lbs. You will be contacted to pay for additional shipping.

You will also need a downgrade dongle such as the E3 Card Reader AVR to perform the downgrade.

Warning. This product is not 'hard' to install, but is very easy for you to stuff up your console. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.

Please note that you have to make sure the clip is perfectly flush with the motherboard before you press it down.   The majority of the issues lie with improper installation of the clip. If the clip is uneven before you press it down, it will slightly bend the pins on the bottom of the clip.

This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!  

This device is only for consoles with NOR flash, not NAND at the moment.  (Doesn't work on Slim 3000 or superslim consoles)

Here is a great installation video:

These are the pre-packaged contents for the E3 Flasher complete kit. If you see resellers/distributors selling for less, it's because they are not selling the package with everything seen below.

 



NOTE: NEW E3 ESATA DOCKING STATION REPLACED BY SMALLER E3 ESATA USB HDD ADAPTER!

This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering!  As well, the plug that they include with the sata dock is not North American.

Please double check to make sure it works with your PS3 as we will not issue refunds if it is not compatible with your PS3 after it has been installed.

Watch the Official E3DIY Video:

  • NOR FLASH ON board
  • 3 save MODE
  • 1 KEY backup or restore, simplicity is best
  • Compatible with all PS3 console - FAT models require soldering
  • Integrated interface varieties, perfect extension, will have more functions with future E3 accessories
  • Related Products

  • Customers Also Bought

  • Customer Reviews

  • E3 NOR Flasher - Downgrader

    IN STOCK

    The E3 NOR Flasher - Downgrader works same as the E3 Flasher COMPLETE Ltd. and includes 4 components: mainboard, cover board, CLIP with softboard, and metal cover.

    The E3 NOR Flasher - Downgrader is also included in the E3 Flasher Ltd. Complete kit.

    The E3 NOR Flasher - Downgrader works on all NOR flash consoles and no soldering.

    Features:

    • Designed to help you program NAND and NOR flash data
    • The simplest way to help you get all function with one key operation without any PC software
    • Easy upgradable from TF card and PC USB
    • No need connect to PC to save data on E3 flasher or TF card in few min with 16M Nor flash memory on board
    • Specifically designed for PS3 and allows user install and operation easier, and even get more function like dual boot
    • Compatible with host version CECH-2500 or below
    • This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!  

      This device is only for consoles with NOR flash, not NAND at the moment.  (Doesn't work on Slim 3000 or superslim consoles)

    Contents:

    • Mainboard
    • Cover board
    • Clip with softboard
    • Metal cover

    Recommended:

    $24.95
  • X3Max USB Development Kit

    The X3Max is a revolutionary USB development board. The X3Max has a 32bit MCU (processor) and 128KB of memory in which to store user hex, these features are unparalleled and not available in any other USB development board. This powerful hardware specification provides the extensibility required to ensure a future proof solution that will be able to keep up with the latest advances in code development. The X3Max also has an inbuilt MicroSD(HC) slot which provides even further expandability!

    With the custom X3Tool programming/flashing software, simple tasks such as uploading hex to the X3 Max are extremely simple as showed in our guide, no drivers are required, simply download the X3Tool software, plug the X3Max in to your computer and flash!

    While the X3Max is very simple to use for the end user who just wants to upload pre-made hex to the board, the combination of the powerful X3Max hardware and X3Tool software means that tasks undertaken by developers and advanced users such as editing the payload can be done right from within the X3Tool software! No complicated multi-software solutions are required.

    The X3Max comes complete in a sturdy plastic presentation case along with a free screwdriver used to open the casing. THIS DOES NOT WORK ON FIRMWARE 3.42 OR ABOVE UNTIL A NEW EXPLOIT/METHOD IS FOUND!

    Features :

    • The X3Max is compatible with all models and regions including: USA, JAP, PAL, and Korea.
    • Compatibile with FAT and SLIM PS3s
    • The X3Max has 128kb of program memory
    • The X3Max is a 32bit processor
    • The X3Max has 16K RAM
    • The X3Max is expandable with expansion port - Onboard microSD Slot (will support 32GB SDHC) for future programming capabilities!
    • Installing the X3Max is as easy as plugging in a USB flash drive, the process is completely solderless and does not void your warranty.
    • The X3Max an open source project and therefore is compatible with all third party developers firmware. All Official builds are tested thoroughly by our team before released to ensure they are stable and bug free.
    • Open up your console to a new generation of homebrew applications
    • Load homebrew apps/games off any USB hard drive/flash drive
    • Fully updatable with new features/updates by connecting X3 Max to any computers USB port
    • Frequent updates by our team and other members of the community combined with X3Tool V2 makes the update process easy, even for novices.

      For the gamer!
    • X3Max has an easy to use Firmware updater that will soon be available for multiple OS.
    • X3Max team provides pre-compiled, tested and certified firmware files that you can trust to run on your X3Max.

      For the Homebrew Developer!
    • X3Max has a simple Payload Editor Application that makes it easy to edit and add custom payloads.
    • X3Max has built-in debugging including USB protocol analyzer so you can easily troubleshoot your payloads.
    $8.95
  • Maximus 360 Lizard Speaker

    This add-on will allow your lizard make beep and alert sounds, this is very useful if you use your lizard to unlock the Slim Liteon drives, it will notify you when the unlock has been done with an audible alert.

    The add-on needs to be installed inside the lizard so require a little bit of soldering knowledge.

    Simple 1 wire one solder install speaker for maximus Lizard

    Full installation tutorial on http://360lizard.com

     

    $9.95
  • PlayStation 2 TV Video System Converter (NTSC>PAL)

    PlayStation 2 TV Video System Converter (NTSC>PAL) !

    $10.00
  • PS2 Laser replacement Service

    Consoles with physical damage cannot be repaired.

    Comes with a 30 day warranty.

    This service has a 2-3 business day turnaround, from when we receive the console.

    Purchase this service, select your shipping method at checkout and send in your PS2 console. We will repair it, fully test your console, and ship back via the shipping method you have already prepaid!

    Send the console only: no Hard drive, cables etc...

    Please follow our return policy info to send your machine to us.

    http://www.gocybershopping.com/customer/help.php?section=returns

    $39.95

Categories

Manufacturers