1-519-884-5545        Contact Us        Sign in

E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak


E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak

  • E3 Flasher Dual Boot PS3 PlayStation3 Downgrader & Jailbreak
  • E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak


Details

Manufacturer
Weight
3.00 lbs
Manufacturer
Additional Info
Additional Pictures
n/a
Usage
n/a
Market price
$99.95
Our price
$64.95 (Save 35%) (US $64.95)

Options

Add E3 Reader to downgrade?
Quantity


IN STOCK

UPDATE: TEAM E3 HAS REPLACED THE ORIGINAL ESATA DOCKING STATION WITH A NEW ESATA HDD ADAPTER WITH SMALLER FORM FACTOR. AS OF 5.20.14 YOU RECEIVE THESE IN SMALLER PACKAGING FROM THE E3 TEAM!

ALL E3 Flashers Kits are sold with European power supply adapters. Power conversion adapters for US/Canada power sold separately.

If you are outside North America, shipping may be slightly more than as shown on our website due to the weight of the E3 Flasher being 3lbs. You will be contacted to pay for additional shipping.

You will also need a downgrade dongle such as the E3 Card Reader AVR to perform the downgrade.

Warning. This product is not 'hard' to install, but is very easy for you to stuff up your console. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.

Please note that you have to make sure the clip is perfectly flush with the motherboard before you press it down.   The majority of the issues lie with improper installation of the clip. If the clip is uneven before you press it down, it will slightly bend the pins on the bottom of the clip.

This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!  

This device is only for consoles with NOR flash, not NAND at the moment.  (Doesn't work on Slim 3000 or superslim consoles)

Here is a great installation video:

These are the pre-packaged contents for the E3 Flasher complete kit. If you see resellers/distributors selling for less, it's because they are not selling the package with everything seen below.

 



NOTE: NEW E3 ESATA DOCKING STATION REPLACED BY SMALLER E3 ESATA USB HDD ADAPTER!

This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering!  As well, the plug that they include with the sata dock is not North American.

Please double check to make sure it works with your PS3 as we will not issue refunds if it is not compatible with your PS3 after it has been installed.

Watch the Official E3DIY Video:

  • NOR FLASH ON board
  • 3 save MODE
  • 1 KEY backup or restore, simplicity is best
  • Compatible with all PS3 console - FAT models require soldering
  • Integrated interface varieties, perfect extension, will have more functions with future E3 accessories
  • Related Products

  • Customers Also Bought

  • Customer Reviews

  • E3 Card Reader AVR

    IN STOCK 

    Deal with a North American supplier, not a supplier from Asia where you might receive a clone or have to wait 3-4 weeks for it to arrive. We have stock ready to ship and you can receive yours in 2-5 business days!

    Works with all HEX and as a bonus with PC AND MAC all for a blow away low price!

    Great for use in conjunction with the E3 Flasher to downgrade your console to 3.55.

    This will also downgrade from 3.55 to 3.41

    Features:

    • Dual Program booting PS3 Jailbreak dongle that is simple to use!
    • 32bit processor with 128K flash. Has strong processing rate and high expansion space
    • 4MB programmable onboard FLASH - Accessed as 4MB USB driver
    • Supports homebrew & back-up manager
    • MicroSD SDHC supported, can load software and homebrew from it
    • SUPPORTS Multi-System WinXP/Vista/Win7/Mac OS/Linux, this is a Multi-System Super-Drag-Drop Upgrade - nothing more than a file copy!
    • Super-Drag-Plug upgrade mode - just copy BIN file and paste into e3 card. Takes a few seconds to finish upgrading - no need for any extra upgrader
    • Dual firmware booting mode, this means hermes v4b and kakaroto latest firmware integrated into one code, and you can use any of them by yourself , no need to re-flash code
    • Support any free PSGROOVE Hex like hermes & kakaroto
    • E3card reader has CE, FCC and RoHS certification , it is a more safer and environmentally friendly product
    • Comes with 1 year Manufacturer's Warranty

    Instrucions:

    1. Download E3 card reader firmware from E3 download page.
    2. Plug E3 card reader into PC, it will show find:
      • E3_4M_STICK DISK
      • E3Upgrader DISK
      • Removable Disk
    3. Copy E3 card reader firmware into E3Upgrader DISK , after 1 second, the blue light on E3 card reader will light up. Meaning the upgrade is complete.
    4. Then eject the E3 Card Reader from the PC and insert into the PS3.

    For information about how to Downgrade your PS3 with E3 Card Reader click here:

    http://www.ps3hax.net/showthread.php?t=16529

    $14.95
  • E3 NOR Flasher - Downgrader

    IN STOCK

    The E3 NOR Flasher - Downgrader works same as the E3 Flasher COMPLETE Ltd. and includes 4 components: mainboard, cover board, CLIP with softboard, and metal cover.

    The E3 NOR Flasher - Downgrader is also included in the E3 Flasher Ltd. Complete kit.

    The E3 NOR Flasher - Downgrader works on all NOR flash consoles and no soldering.

    Features:

    • Designed to help you program NAND and NOR flash data
    • The simplest way to help you get all function with one key operation without any PC software
    • Easy upgradable from TF card and PC USB
    • No need connect to PC to save data on E3 flasher or TF card in few min with 16M Nor flash memory on board
    • Specifically designed for PS3 and allows user install and operation easier, and even get more function like dual boot
    • Compatible with host version CECH-2500 or below
    • This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!  

      This device is only for consoles with NOR flash, not NAND at the moment.  (Doesn't work on Slim 3000 or superslim consoles)

    Contents:

    • Mainboard
    • Cover board
    • Clip with softboard
    • Metal cover

    Recommended:

    $54.95
  • X3Max USB Development Kit

    The X3Max is a revolutionary USB development board. The X3Max has a 32bit MCU (processor) and 128KB of memory in which to store user hex, these features are unparalleled and not available in any other USB development board. This powerful hardware specification provides the extensibility required to ensure a future proof solution that will be able to keep up with the latest advances in code development. The X3Max also has an inbuilt MicroSD(HC) slot which provides even further expandability!

    With the custom X3Tool programming/flashing software, simple tasks such as uploading hex to the X3 Max are extremely simple as showed in our guide, no drivers are required, simply download the X3Tool software, plug the X3Max in to your computer and flash!

    While the X3Max is very simple to use for the end user who just wants to upload pre-made hex to the board, the combination of the powerful X3Max hardware and X3Tool software means that tasks undertaken by developers and advanced users such as editing the payload can be done right from within the X3Tool software! No complicated multi-software solutions are required.

    The X3Max comes complete in a sturdy plastic presentation case along with a free screwdriver used to open the casing. THIS DOES NOT WORK ON FIRMWARE 3.42 OR ABOVE UNTIL A NEW EXPLOIT/METHOD IS FOUND!

    Features :

    • The X3Max is compatible with all models and regions including: USA, JAP, PAL, and Korea.
    • Compatibile with FAT and SLIM PS3s
    • The X3Max has 128kb of program memory
    • The X3Max is a 32bit processor
    • The X3Max has 16K RAM
    • The X3Max is expandable with expansion port - Onboard microSD Slot (will support 32GB SDHC) for future programming capabilities!
    • Installing the X3Max is as easy as plugging in a USB flash drive, the process is completely solderless and does not void your warranty.
    • The X3Max an open source project and therefore is compatible with all third party developers firmware. All Official builds are tested thoroughly by our team before released to ensure they are stable and bug free.
    • Open up your console to a new generation of homebrew applications
    • Load homebrew apps/games off any USB hard drive/flash drive
    • Fully updatable with new features/updates by connecting X3 Max to any computers USB port
    • Frequent updates by our team and other members of the community combined with X3Tool V2 makes the update process easy, even for novices.

      For the gamer!
    • X3Max has an easy to use Firmware updater that will soon be available for multiple OS.
    • X3Max team provides pre-compiled, tested and certified firmware files that you can trust to run on your X3Max.

      For the Homebrew Developer!
    • X3Max has a simple Payload Editor Application that makes it easy to edit and add custom payloads.
    • X3Max has built-in debugging including USB protocol analyzer so you can easily troubleshoot your payloads.
    $8.95
  • ARDUINO MEGA 2560 REV3

    ARDUINO MEGA 2560 REV3

    IN STOCK

     

    Overview

    Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.

    Technology

    The Mega 2560 is a  board based on the 8-bit AVR microcontroller ATmega2560 by Atmel. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports). It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable. The Mega 2560 board is compatible with most shields designed for the Uno. To compare this board to the current, past or outdated boards see the Comparison Page.

    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limit) 6-20V
    Digital I/O Pins 54
    PWM Digital I/O Pins 14
    Analog Input Pins 16
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 256 KB
    Flash Memory for Bootloader 8 KB
    SRAM 8 KB
    EEPROM 4 KB
    Clock Speed 16 MHz

     


    Documentation

    Arduino MEGA 2560 is open-source hardware! These are the relevant files:

    Schematics - Reference Design - Board size

    If you want more information about programming the Arduino Mega 2560 or how to interface hardware with it, please go to the Product Page.
    Arduino Mega 2560 is programmed, as all the other Arduino boards  with the Arduino Software (IDE) that you can download for free.

    Arduino Uno Rev3 is programmed, as all the other Arduino boards  with the Arduino Software (IDE) that you can download for free.

    $14.95
  • Game Boy Advance Hand Grip Pak

    Game Boy Advance Hand Grip Pak! The GBA Hand Grip Pak is very hard to describe. It's purpose seems to be of the same nature as the Mini Stick: if you believe the GBA doesn't really fit your hand, or your hands are too large, us it. Some gamers even claim Nintendo should have had this idea first!
    $4.99
  • Game Boy Advance Sunfilter

    Game Boy Advance Sunfilter!
    $5.99

Categories

Manufacturers