Those that have fitted a CoolRunner to an Xbox Slim will be no stranger to the fact that it can take a great deal of trial and error to get the optimized boot times down to less than 5 seconds. The main issue is the CPU_RST wire which has to be up to 50cm long and then coiled underneath the motherboard. In many cases the positioning of the coil is a factor due to signal interference. Then you have to try different lengths, 40cm, Xecuter has developed a simple yet elegant solution for this problem. Using the process of serpentining, Xecuter has designed a QSB PCB for the Xbox 360 slim that fits neatly into place, giving you an optimized solution enabling you to select several different lengths without having to cut any wires and eliminates any guess work and possible signal interference issues. Simply cut the blue CPU_RST wire to 8cm and then you can select from 50cm, 47cm, 41cm, 38cn, 35cm, 32cm & 29cm.
Never solder/unsolder the trace cut again!
When using a Sputnik Probe you have to repair the trace when you have finished programming, and if you ever need to flash the drive again you would have to de-solder.
This simple PCB add-on enables you to solder the board once and then thats all you will ever need to do. The simple switch will open / close the circuit and there is an extra large pad to use when probing for when you need to unlock the SPI.
Open / Close trace cut without further soldering
Large pad for easy probing
Easy to install - takes minutes!
NOTE: This is NOT the SPUTNIK360 - Liteon DG-16D4S DVD Unlock Switch, this is an addon product for the SPUTNIK360 PROBE and will not unlock the SPI without the use of the Probe.
This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.
Covert Jacket Hook Spy Camera
|Video Resolution:||720 x 480|
|Frame Rate:||30 fps|
|Recording Types:||Motion Detect|
|Record Time:||20min per 1GB|
|Storage:|| MicroSD <32GB |
Beware of clones! Only buy from authorized resellers!
NOTE: THESE WORK GREAT FOR PHAT 360 CONSOLES! OUR TECH HAS TESTED THEM AND FOUND THEM TO BE THE BEST PERFORMANCE.
NOTE: The Mtx Glitcher ships with empty CPLD, it needs programming via JTAG. The Matrix NAND Programmer WILL NOT work to program the Matrix Glitcher, it is strictly for the NAND flash located on the Xbox 360 motherboard.
For matrix glitcher you need the jrp v2 (order from the drop down menu)
You need to solder directly to the chip and run wires from the jrp v2
Please use the rgh2 glitch hack diagram
The Matrix Glitcher 360 features a xilinx cpld with on board voltage switch for phat consoles and a built-in jtag port to ensure current and future compatibility with the "GliGLi hack" implementation.
A pdf with the complete procedure to implement the GliGli Hack (made by Razkar and Tuxuser) as well as all the needed files are mirrored in the download section found here.
• Booting of unsigned code on Xbox 360
• Compatible with both X360 (except Xenon)
• Works with all X360 NAND programmers
• Compatible with all X360 kernel versions
• Quick installation (7 Wires on Slim or 6 Wires on Phat)
• Compact PCB size with easy to solder pads.
• Booting of X360 unsigned code within max of 2 minutes
• Matrix Design and Quality
• Budget pricing
Matrix NAND Programmer – (Release date 8 September 2011)
Cost effective NAND reader / programmer to complete the GliGli Hack..
• Fast USB SPI 360 NAND programmer!