This is the speaker upgrade kit that is for consoles that do not have the built in speaker system - essentially all non-Limited Edition consoles (GOW3, MW3, Star Wars and Halo Reach) which only have a cheap low end buzzer type speaker.
Simple conversion kit for all DemoN Phat SB 16MB NAND so you can install to any BB 256/512MB without having to buy a new version DemoN.
Make sure you update DemoN to at least 1.04 firmware
Team Maximus releases the Stinger 3.0L to RGH your XBox360 PHAT and SLIM (Trinity)
Fast RGH 2 glitcher chip.
New Model 3.0L (with crystal for Corona compatibility) PAD by PAD compatible with last Stinger 2.0, it uses same .jed or .xsvf files, the improvement are:
To use the 68nf capacitor for stubborn PHAT consoles just bridge the J68NF jumper and add a Ground wire on the AVG pad to the AV port.
The SLIM program works on all TRINITY boards.
The PHAT program works on all HDMI models (Falcon, Zephyr, Jasper), and once programmed the model is chosen by setting the onboard solder jumpers.
Chips can be reprogrammed using NANDFLASHER (updated to nandpro 3.0) or any JTAG cable.
Hardware is the same for PHAT and SLIM. It is only the on-board program which can of course be changed later by the end user if needed.
The Trident MX tool will unlock Slim Lite-on DVD drives (DG-16D4S) that come with a Macronix internal SPI Flash. Until recently locked drives were only found in the firmware’s 0225, 0401 and 1071, but the latest dashboard update (2.0.13599) has locked the 9504 drives with 0272 firmware. The Trident MX is a MUST have in your arsenal of weapons.
Combined with the POWER of Maximus Lizard (Gecko 1.16 and above) and in a few days supported by Jungleflasher, this is the perfect tool to do the job professionally and without hassle.
Forget about tricking/spoofing the drive with unsafe methods of picking and choosing different resistors; We have a 0 to 100 ohm trimmer installed. There is no need to run a complex application to do the Macronix Unlock - Maximus Lizard does the magic for you.
The Trident MX is a tool designed for pro-modders but will be loved be even by the newest Modder!!
Note: This tool works only with Macronix SPI Flash. (For Winbond we are still developing a proper and safe solution to be announced at another time.)