YOU WILL RECEIVE JRP V2
OUT OF STOCK ETA MID MARCH
As of 5/7/14 these are shipping as TX J-R Programmer V1 with a free J-R Programmer SPEED UPGRADE QSB from Team Xecuter!
The new J-R programmer has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.
A third of the size of the NAND-X and optimized to run faster than any other USB-SPI based tool (other brands run at 50% of NAND-X speed, the J-R runs at 80%), this nifty tool can fully read/write NAND over SPI and can also program the Xilinx CoolRunner Dev Boards over USB !
Complete with a CoolRunner JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 268). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install.
The J-R programmer is also fully upgradeable and can be programmed using the X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode.
RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
What's In The Kit:
Those of you looking for a similar setup as the TX NAND-X RGH Edition V3, we recommend the following items that are available for purchase separately:
NOTE: This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity
OUT OF STOCK
The 360 NandFlasher from Maximus is one of the latest products from the team which allows you to read and write to the NAND firmware chip of the 360, this can be useful in many ways, the first is for people that have consoles that either the drive has totally died and the key for the drive is lost, or that bought damaged consoles that had no drive at all, with the Maximus 360 NandFlasher you will now be able to use the device to read the DVD key right out of the motherboards NAND firmware chip, once you have this key you can then embed it into a new drives firmware and recover the console, we know this is going to be a hugely popular service related tool as there are many people that have consoles like this laying around that they can now recover and sell as refurbished units, where before they were just junk laying in workshops.
If you are a repair centre looking for a cheap yet valuable USB 360 Nand flashing tool to recover dead consoles, or a home user wanting to expand their experience with the 360, the 360 Nand Flasher from Maximus is going to do what you need and be a solid and reliable device. Do note that in its current form to use the 360 NandFlasher soldering is involved, so before you order keep that in mind and make sure you have the right tools and knowledge on how to solder.