YOU WILL RECEIVE JRP V2
OUT OF STOCK ETA MID MARCH
As of 5/7/14 these are shipping as TX J-R Programmer V1 with a free J-R Programmer SPEED UPGRADE QSB from Team Xecuter!
The new J-R programmer has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.
A third of the size of the NAND-X and optimized to run faster than any other USB-SPI based tool (other brands run at 50% of NAND-X speed, the J-R runs at 80%), this nifty tool can fully read/write NAND over SPI and can also program the Xilinx CoolRunner Dev Boards over USB !
Complete with a CoolRunner JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 268). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install.
The J-R programmer is also fully upgradeable and can be programmed using the X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode.
RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
What's In The Kit:
Those of you looking for a similar setup as the TX NAND-X RGH Edition V3, we recommend the following items that are available for purchase separately:
NOTE: This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity