Is your old Hitachi/Samsung/Benq System on its last legs ? Overheating and Freezing Issues ? 2 x Red Lights Crashing Your System ? THE ULTIMATE SOLUTION IS HERE !!!!!!
The Xecuter xDrive Plus (inc xFan) is the next level in Xbox 360 cooling, stability and easy external firmware upgrading. The famous Team Xecuter have once again developed a solution to a very common problem on the older Xbox 360 consoles - the dreaded 2 x Red Lights and Overheating / Game Freezing issues.
Using the same technology as used on the original xDrive, you now have the ability to remove your internal 360 DVD ROM and have it connected to your 360 externally. The space where your internal DVD used to be is then replaced by an entire cooling system - as this is one of the main sources of heat inside the Xbox and it resides directly over the GPU (which is the main causes of overheating issues / game freezing / graphics corruption / rrod) - this now gives your Xbox a drop in temperature that is unprecedented in any of the cooling kits or fans that have ever been released before. In tests the GPU alone dropped as much as 20 Degrees Celsius with the xFan enabled !!! The entire system is completely custom designed from the ground up. It has been extensively tested by many users on the Xecuter forums and has shown to be a resounding success. One user reported that his console would give 2 Red Lights (Over heated) after 5 minutes even with the RROD Repair Kit installed and also with a Whisper Legacy Fan. When he installed the xDrive Plus and xFan - he tested the system overnight and finally turned it off manually after it had been running game demos for 20 hours straight !!! AMAZING RESULTS !!!
As a bonus your 360 DVD drive is now completely external to your Xbox so you can simply connected the xDrive to a CK3 and SATA cable and update your firmware (There is a CK3 port and SATA port built in to the read of the xDrive for your convenience) You may also want a second drive to perform backups of your valuable Xbox 360 games using the special 0800 firmware. It's a very simple case of Plug 'n Play.
Click Here to see the huge changes in temperature when the xFan is activated !!!
Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.
The Mega 2560 is a board based on the 8-bit AVR microcontroller ATmega2560 by Atmel. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports). It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable. The Mega 2560 board is compatible with most shields designed for the Uno. To compare this board to the current, past or outdated boards see the Comparison Page.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limit)||6-20V|
|Digital I/O Pins||54|
|PWM Digital I/O Pins||14|
|Analog Input Pins||16|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||256 KB|
|Flash Memory for Bootloader||8 KB|
|Clock Speed||16 MHz|
Arduino MEGA 2560 is open-source hardware! These are the relevant files:
If you want more information about programming the Arduino Mega 2560 or how to interface hardware with it, please go to the Product Page.
Arduino Mega 2560 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
Arduino Uno Rev3 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
With the Flashed system there is an unpredictability of game releases that require machines to be updated in order to play all the latest games.
This service is available to customers who have had a flash service performed by Gocybershop.ca Previously. An in-tact GoCybershop warranty sticker must be present to receive this service (all others will be charged full price).
Please Update your system to the latest firmware:
Any Slim Console - LT PLUS 3.0 ( except Hitachi 0500 & Liteon 1175)
Liteon - LT PLUS 3.0
Benq - LT PLUS 3.0
Samsung - LT 2.01
Hitachi - LT PLUS 2.0
Just purchase this service, select your shipping method at checkout and send in your xbox console! We will install the Xbox 360 LT ixtreme Firmware, fully test your console, and ship back via the shipping method you have already prepaid!
NOTE: Please send the CONSOLE ONLY, no cables, controllers, harddrive or any other piece needed. If you do send any extra items this will cost us more for shipping and we will have to bill you accordingly. Please follow our return polices on how to ship your 360 too us.