SAVE $10 IF YOU ORDER THIS AS AN ADDON TO ANY COBRA ODE!
(NOTE: discount will not work if ordered separately.)
Pictured below is the new DMC module for PHAT PATA, SATA PHAT, 2k, 2k5 and 3k consoles which enables use of all versions of Cobra ODE (3.xx/4.xx and 5.xx) on 4.66 OFW. A swap disc is required in line with current usage of Cobra ODE on OFW 4,66 and 4k consoles.
The DMC module has an Actel FPGA on board which controls the optical lens' units disc eject motor, thus enabling the user to insert and remove discs without detection by the drive controller. The onboard FPGA is linked to a USB PHY which enables full reprogramming of the FPGA at any time via USB connected to your PC.
The Cobra DMC connects to the Cobra ODE (all models) via the JTAG 24 pin FFC port on the Cobra ODE and the "main" port on the Cobra DMC. Cables are included.
The Cobra DMC can be mounted adjacent to the optical drive of the PS3. The module then connects to the eject motor inside the drive, without soldering via FFC cables.
For more info visit:
More details to come!
You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey MaKey.
Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator clips. The MaKey MaKey is an invention kit that tricks your computer into thinking that almost anything is a keyboard. This allows you to hook up all kinds of fun things as an input. For example, play Mario with a Play-Doh keyboard, or piano with fruit!
The MaKey MaKey uses high resistance switching to detect when you’ve made a connection even through materials that aren’t very conductive (like leaves, pasta or people). This technique attracts noise on the input, so a moving window averager is used to lowpass the noise. The on-board ATMega32u4 communicates with your computer using the Human Interface Device (HID) protocol which means that it can act like a keyboard or mouse.
There are six inputs on the front of the board, which can be attached to via alligator clipping, soldering to the pads, or any other method you can think of. There are another 12 inputs on the back, 6 for keyboard keys, and 6 for mouse motion, which you can access with jumpers via the female headers. If you wish to use a different set of keys, or otherwise change the behavior of your MaKey MaKey, you can simply reprogram it using the Arduino environment. Oh yeah, we didn’t mention that the MaKey MaKey is an Arduino-compatible controller? That’s right, it runs the Leonardo bootloader so reprogramming is fast and easy.
Note: Now included with the MaKey MaKey is a USB cable, pack of jumper wires as well as a pack of alligator clips!
Note: See the GitHub link below for support with the Arduino IDE.
NO POWER SUPPLIES!!
PS3 systems have quite a number of issues and servicing them can require a wide arrangements of parts, too many to list! If you need a part for the PS3 that you haven't found listed on our site, please contact our technical department via Email for specific part orders.
Or just order and put the part you would like in the comment box.
Prices will vary on a case-by-case basis