Pi 3 compared to Pi 2
NOTE: ADD RASPBERRY PI CASE FOR ONLY $5.00 ON THE OPTIONS DROP DOWN MENU
More processor speed. The CPU on the Pi 3 is one and a half times faster at 1.2 GHz. Your Pi board performs better.
On-board connectivity. The Pi 3 features 802.11 b/g/n 2.4 GHz Wireless LAN and Bluetooth Classic & Low Energy (BLE). You can get connected much quicker without the need for any external device.
2.5 A power supply. With more processor speed and on-board connectivity, you'll need more power. Power supplies for previous Pi boards will not be sufficient. You will need the Official Raspberry Pi 3 Power Supply (9098126 — white) or (9098135 — black).
New components. The Pi 3 features a chip antenna where status LEDs were located previously. The status LEDs are still on the board, right next to the microSD card slot.
New to Raspberry Pi?
The Raspberry Pi is a single computer board — developed to encourage and aid the teaching of programming and computing. It is also a fantastic starting point for the development of the Internet of Things (IoT) projects. The low cost and 'plug and play' nature of Pi makes for a board that is accessible to all and has numerous connectivity options. Pi is the perfect experimental tool, whether you want to use it as a desktop computer, media centre, server or monitoring/security device within your home. No limits. Linux-based operating systems run on the Pi with plenty of access to free software and downloads. What is more, there is a great Pi community out there — look at DesignSpark, the design engineer community at RS.
Features & Benefits of the Pi 3
•Broadcom BCM2837 chipset running at 1.2 GHz
•64-bit quad-core ARM Cortex-A53
•802.11 b/g/n Wireless LAN
•Bluetooth 4.1 (Classic & Low Energy)
•Dual core Videocore IV® Multimedia co-processor
•1 GB LPDDR2 memory
•Supports all the latest ARM GNU/Linux distributions and Windows 10 IoT
•microUSB connector for 2.5 A power supply
•1 x 10/100 Ethernet port
•1 x HDMI video/audio connector
•1 x RCA video/audio connector
•1 x CSI camera connector
•4 x USB 2.0 ports
•40 GPIO pins
•DSI display connector
•microSD card slot
•Dimensions: 85 x 56 x 17 mm
The Official Pi 3 Power Supply Unit is for the Pi 3 board only. The power supply unit is not for general purpose power supply.
Presenting Minimus, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
22 Programmable I/O Lines
512 Byte SRAM
512 byte EEPROM
16 MIPS Throughput
USB 2.0 High Speed
16MHz Quartz Crystal Oscillator Circuit
5V USB Powered
Power / Status LED's
Male USB Connector - No Cable Required
Access to all IO's
Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)
Full LUFA Compatability
Full LibUSB Compatability
Simple Plug n Play
Atmel FLIP Software Drivers: http://www.atmel.com/dyn/products/to...p?tool_id=3886
Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
Here are some development resources for AVR USB Development:
AVR-USB-162 blink LED demo code (C source and HEX)
AVR-USB-162 button demo code (C source and HEX)
AVR-USB-162 frequency generator (C code and HEX)
AVR-USB-162 mouse demo code C source
AVR-USB-162 virtual COM port demo code C source
MyUSB LGPL USB stack from Dean Camera
The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
The PIC18F4550 USB Dev Kit is loaded with features, including a large 32kb of program memory, optimized for C programs. The PIC18F4550 Development Board comes complete with the Microchip PIC18F4550 microcontroller pre-installed, together with the necessary crystal and power supply components, for a ready-to-run solution. Simply connect the power and download your program, using the easy to use programming interface and software, and your ready to start exploring the new PIC18 USB.
PIC18F USB Dev Kit Programs can be downloaded or updated directly to the microcontroller using the USB in-circuit programming interface together with a suitable programmer or MPLabs HID Bootloader software.
Now works with v3 Heremes!
Pushbuttons and LED's are also included on our development board for testing and developing your code. This board is the ideal for applications requiring a USB Connection together with a large number of A/D inputs for monitoring and control.
Our new PIC18F4550 Development board will get you started with an inexpensive, ready-to-run solution, which is ideal for the student or hobbyist.
Tired of your slim PS3 wasting electricity in standby mode? We designed a simple AC cable to allow you to turn the console power off so you dont waste dollars in electricity your not using.
Deal with a North American supplier, not a supplier from Asia where you might receive a clone or have to wait 3-4 weeks for it to arrive. We have stock ready to ship and you can receive yours in 2-5 business days!
Works with all HEX and as a bonus with PC AND MAC all for a blow away low price!
Great for use in conjunction with the E3 Flasher to downgrade your console to 3.55.
This will also downgrade from 3.55 to 3.41
For information about how to Downgrade your PS3 with E3 Card Reader click here:
Game Boy Advance Multi-Player Convertor !You still have an old GameBoy Pocket or Color link cable? You don't want to spend too much extra cash for a new cable? Here is the solution. Get this inexpensive Multi-Player Convertor to use your old GameBoy Pocket or Color link cables on the GameBoy Advance machine. For up to 4 player action.