Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.
The Mega 2560 is a board based on the 8-bit AVR microcontroller ATmega2560 by Atmel. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports). It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable. The Mega 2560 board is compatible with most shields designed for the Uno. To compare this board to the current, past or outdated boards see the Comparison Page.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limit)||6-20V|
|Digital I/O Pins||54|
|PWM Digital I/O Pins||14|
|Analog Input Pins||16|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||256 KB|
|Flash Memory for Bootloader||8 KB|
|Clock Speed||16 MHz|
Arduino MEGA 2560 is open-source hardware! These are the relevant files:
If you want more information about programming the Arduino Mega 2560 or how to interface hardware with it, please go to the Product Page.
Arduino Mega 2560 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
Arduino Uno Rev3 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
The PIC18F4550 USB Dev Kit is loaded with features, including a large 32kb of program memory, optimized for C programs. The PIC18F4550 Development Board comes complete with the Microchip PIC18F4550 microcontroller pre-installed, together with the necessary crystal and power supply components, for a ready-to-run solution. Simply connect the power and download your program, using the easy to use programming interface and software, and your ready to start exploring the new PIC18 USB.
PIC18F USB Dev Kit Programs can be downloaded or updated directly to the microcontroller using the USB in-circuit programming interface together with a suitable programmer or MPLabs HID Bootloader software.
Now works with v3 Heremes!
Pushbuttons and LED's are also included on our development board for testing and developing your code. This board is the ideal for applications requiring a USB Connection together with a large number of A/D inputs for monitoring and control.
Our new PIC18F4550 Development board will get you started with an inexpensive, ready-to-run solution, which is ideal for the student or hobbyist.
Tired of your slim PS3 wasting electricity in standby mode? We designed a simple AC cable to allow you to turn the console power off so you dont waste dollars in electricity your not using.
With the Flashed system there is an unpredictability of game releases that require machines to be updated in order to play all the latest games.
This service is available to customers who have had a flash service performed by Gocybershop.ca Previously. An in-tact GoCybershop warranty sticker must be present to receive this service (all others will be charged full price).
Please Update your system to the latest firmware:
Any Slim Console - LT PLUS 3.0 ( except Hitachi 0500 & Liteon 1175)
Liteon - LT PLUS 3.0
Benq - LT PLUS 3.0
Samsung - LT 2.01
Hitachi - LT PLUS 2.0
Just purchase this service, select your shipping method at checkout and send in your xbox console! We will install the Xbox 360 LT ixtreme Firmware, fully test your console, and ship back via the shipping method you have already prepaid!
NOTE: Please send the CONSOLE ONLY, no cables, controllers, harddrive or any other piece needed. If you do send any extra items this will cost us more for shipping and we will have to bill you accordingly. Please follow our return polices on how to ship your 360 too us.
This add-on will allow your lizard make beep and alert sounds, this is very useful if you use your lizard to unlock the Slim Liteon drives, it will notify you when the unlock has been done with an audible alert.
The add-on needs to be installed inside the lizard so require a little bit of soldering knowledge.
Simple 1 wire one solder install speaker for maximus Lizard
Full installation tutorial on http://360lizard.com