The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v16 and it is also compatible with the newly released SCPH-7700x & 7900x consoles. Its PCB layout is a perfect “L” shape which makes install a breeze. We believe this chip is a great solution for those looking for a compact and feature packed chip without the high price tag. We also want to explain to customers that there are two producers of the Modbo range of chips, first are the guys at Modbo.com who produced the Modbo 3.0 & Modbo 4.0. Second are the guys over at Modbo2.com who produced the Modbo v2.1 & Modbo 745.
A major difference we found between Modbo 4 and Modbo 745 is the Modbo 4.0 does work from v5 to v16 as advertised, but the Modbo 745 has trouble working in consoles under v9. Another bonus with the Modbo 4.0 is its now running the Matrix Infinity firmware v1.91 and is also possible to upgrade the firmware at a later date without any problems. If that wasn’t enough, they have now managed to get the firmware’s config menu and all its options to work and save. You can now go into the config menu and setup the Modbo 4 the way you want it, this is extremely handy for a lot of reasons. The Modbo 4.0 also uses a clock point, some of our customers have found that chips using a clock point “CX” are generally more stable then the same type of chip not using a clock point.
The Modbo 4.0 is a clone of the original Matrix Infinity range of PS2 mod chips. One of the major improvements Modbo 4 has over other Matrix clones is its better compatibility with DVD 9 and runs dual layer much better then older models. Modbo 4.0 comes on a differently laid out pcb to earlier model Modbo chips, allowing for a slightly neater install. There are a few clones of the Matrix Infinity floating around, Modbo , AppleEx , Matrix Infinity SE and some more. The good thing about these chips is you are getting most of the functions of the original Matrix Infinity at the fraction of the cost. The Modbo 4 also has auto media detection for direct booting and All Region DVD Support. The Modbo 4 also comes with a Diode fix for the PSTwo Slimline v12.
INSTALLATION DIAGRAMS: (RAR download) v5 to v19
UPDATE: TEAM E3 HAS REPLACED THE ORIGINAL ESATA DOCKING STATION WITH A NEW ESATA HDD ADAPTER WITH SMALLER FORM FACTOR. AS OF 5.20.14 YOU RECEIVE THESE IN SMALLER PACKAGING FROM THE E3 TEAM!
ALL E3 Flashers Kits are sold with European power supply adapters. Power conversion adapters for US/Canada power sold separately.
If you are outside North America, shipping may be slightly more than as shown on our website due to the weight of the E3 Flasher being 3lbs. You will be contacted to pay for additional shipping.
You will also need a downgrade dongle such as the E3 Card Reader AVR to perform the downgrade.
Warning. This product is not 'hard' to install, but is very easy for you to stuff up your console. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.
Please note that you have to make sure the clip is perfectly flush with the motherboard before you press it down. The majority of the issues lie with improper installation of the clip. If the clip is uneven before you press it down, it will slightly bend the pins on the bottom of the clip.
This Ultimate PS3 Downgrade Device - will allow you to downgrade a NOR PS3 from any new firmare to 3.55!
This device is only for consoles with NOR flash, not NAND at the moment. (Doesn't work on Slim 3000 or superslim consoles)
Here is a great installation video:
These are the pre-packaged contents for the E3 Flasher complete kit. If you see resellers/distributors selling for less, it's because they are not selling the package with everything seen below.
NOTE: NEW E3 ESATA DOCKING STATION REPLACED BY SMALLER E3 ESATA USB HDD ADAPTER!
This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering! As well, the plug that they include with the sata dock is not North American.
Please double check to make sure it works with your PS3 as we will not issue refunds if it is not compatible with your PS3 after it has been installed.
Watch the Official E3DIY Video:
* DATE SUBJECT TO CHANGE WITHOUT NOTICE
Original DVD drive PCB for Liteon Slim drives on Xbox 360 slim. These are unlocked and are ready to go!
Just retrieve original keys from old slim drive, 9504, 0225, 0401 and install this new board
and flash with the keys!
We used the Kamikaze method to unlock these boards!
NO other details available for this product.