PS Vita 3G to microSD card adapter v2.1
NOTE: NO NEED TO SOLDER THE JUMPER WIRE, THESE ARE WORKING 100%
NOTE: NEW INSTRUCTIONS AND NEW SOFTWARE FOR DOWNLOAD:
modify ur0:tai/config.txt and add ur0:tai/usbmc.skprx under the line that says *KERNEL.
Also copy usbmc.skprx under ur0:tai.
Copy the Enso.vpk, usbmc_installer, vitashell.vpk to UX0: apps
2. Install usbmc_installer
3. Click usbmc_installer bubble , install and then
4. Go back usbmc_installer, press cross and then square
After reboot, you can see the sd card
References YouTube link:
Two-player adapter compatible with PS, PS2, and PS3 joypads.
Use your Joypads for PS, PS2, PS3, Guncon Compatable Guns, racing wheel or dancing controller with your PC, PS2 or PS3 Supports all buttons, including the two analog knobs
Service - PS2 Modchip INSTALLATION For Slim Console any version No experience with soldering? Don't want to damage your PlayStation 2 console? We'll install your modchip for you. One of the best modchips for your Playstation 2, professionally installed by our technicians. All installation is guaranteed 100% with a 30 day limited warranty. Just purchase this service, select your shipping method at checkout and send in your PS2 console! We will install the ModChip, fully test your console, and ship back via the shipping method you have already prepaid! Use our return policy info to send your machine to us. Here is the link: http://www.gocybershopping.com/customer/help.php?section=returns
Allen & Heath Zone 62 Club Mixer Technical Specifications 0dBu = 0.775 Volts rms +4dBu = 1.23V rms 0dBV = 1 Volt rms -10dBV = 316mV rms Maximum output level XLR +26dBu into >2k ohm load TRS jack +21dBu into >2k ohm load RCA Phono +15dBu into >10K ohm load Internal headroom Channels +21dB Mix to output +23dB Peak indicators Turn on 5dB before clipping Meters MIX /MONITOR Peak hold 12 LED 3 colour STEREO CHANNEL Peak reading 4 LED 3 colour Frequency response 20Hz to 40kHz +0/-1dB Distortion THD+noise measured at +14dBu 1kHz < 0.006% Crosstalk channel shutoff measured at 1kHz < 90dB Noise measured rms 22Hz to 22kHz MIC EIN -128dB referred to 150 ohm source Residual output noise XLR -90dBu (-94dB S/N) TRS jack -84dBu (-84dB S/N) L RCA -92dBu (-84dB S/N) Mix noise, ch routed XLR -86dBu (-90dB S/N) TRS jack -82dBu (-82dB S/N) RCA Phono -91dBu (-83dB S/N) Power Supply Internal switch mode power unit with auto sensing mains input. MAINS IN socket IEC 3 pin Power lead Country dependent with moulded mains plug supplied AC mains 100 to 240V AC @ 50/60Hz Consumption 30W max Mains fuse rating 100-240V AC T500mA 20mm
9 DIFFERENT CAR LOGOS TO CHOOSE FROM!
JUST PUT YOUR FIRST CHOICE AND SECOND CHOICE IN THE COMMENT BOX PLEASE.