Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.
The Mega 2560 is a board based on the 8-bit AVR microcontroller ATmega2560 by Atmel. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports). It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable. The Mega 2560 board is compatible with most shields designed for the Uno. To compare this board to the current, past or outdated boards see the Comparison Page.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limit)||6-20V|
|Digital I/O Pins||54|
|PWM Digital I/O Pins||14|
|Analog Input Pins||16|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||256 KB|
|Flash Memory for Bootloader||8 KB|
|Clock Speed||16 MHz|
Arduino MEGA 2560 is open-source hardware! These are the relevant files:
If you want more information about programming the Arduino Mega 2560 or how to interface hardware with it, please go to the Product Page.
Arduino Mega 2560 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
Arduino Uno Rev3 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
Beware of clones! Only buy from authorized resellers!
NOTE: THESE WORK GREAT FOR PHAT 360 CONSOLES! OUR TECH HAS TESTED THEM AND FOUND THEM TO BE THE BEST PERFORMANCE.
NOTE: The Mtx Glitcher ships with empty CPLD, it needs programming via JTAG. The Matrix NAND Programmer WILL NOT work to program the Matrix Glitcher, it is strictly for the NAND flash located on the Xbox 360 motherboard.
For matrix glitcher you need the jrp v2 (order from the drop down menu)
You need to solder directly to the chip and run wires from the jrp v2
Please use the rgh2 glitch hack diagram
The Matrix Glitcher 360 features a xilinx cpld with on board voltage switch for phat consoles and a built-in jtag port to ensure current and future compatibility with the "GliGLi hack" implementation.
A pdf with the complete procedure to implement the GliGli Hack (made by Razkar and Tuxuser) as well as all the needed files are mirrored in the download section found here.
• Booting of unsigned code on Xbox 360
• Compatible with both X360 (except Xenon)
• Works with all X360 NAND programmers
• Compatible with all X360 kernel versions
• Quick installation (7 Wires on Slim or 6 Wires on Phat)
• Compact PCB size with easy to solder pads.
• Booting of X360 unsigned code within max of 2 minutes
• Matrix Design and Quality
• Budget pricing
Matrix NAND Programmer – (Release date 8 September 2011)
Cost effective NAND reader / programmer to complete the GliGli Hack..
• Fast USB SPI 360 NAND programmer!