PS2 ModBo v4.0 Installation for Older FAT PS2

The 360 LiteKey by Maximus is an advanced version of the Lite-On rebuild board, this little device serves as not only a rebuild PCB for the Lite-On 83850 V2 & 93450 V3, but it also acts as a Vampire spear as well, so all you need to do with the 360 LiteKey is install it and use the Xtractor Pro, or the 360 power unit from the USB Xtractor to then do a full firmware dump of your drive.

But that’s not the only function of this neat little invention, as some of you may know, when using the LT firmware on the Lite-On 83850 V2 & 93450 V3 drives, before you accept any updates for the 360 console you should really flash the firmware on your drive back to its original state before doing the update, this is where the Maximus 360 LiteKey really shines, because after installation there is no need to open the drive again to be able to do this, the 360 LiteKey can auto switch between operational mode or firmware extraction mode, where if you were using something like the standard Lite-On rebuild board, to flash the drive back to its original state you would need to open the drive and use the Vampire to make the full dump needed to finalize the process, with Maximus 360 LiteKey that’s a thing of the past, after the first install there is no need to ever open the drive again.

Features:

• Original Design Based On The Mra Concept
• Smart Mtk Mode, No Need To Open Drive To Flip Any Switch
• Rebuild Board At 100%
• Zero Intrusion To The Drive When In "Normal Mode"
• Undetectable When Placed In Disabled Mode
• Visual Mode Indicators
• Compatible With Latest Dosflash And Jungleflasher
• Disable/Re-Enable Without Opening Your Drive Case Again!
• Permanent-Enable Mode
• Minimal Current Consumption
• Quicksolder Pads (Noob Friendly)
• High Quality Materials

IN STOCK

SAVE $10 IF YOU ORDER THIS AS AN ADDON TO ANY COBRA ODE!
(NOTE: discount will not work if ordered separately.)

Pictured below is the new DMC module for PHAT PATA, SATA PHAT, 2k, 2k5 and 3k consoles which enables use of all versions of Cobra ODE (3.xx/4.xx and 5.xx) on 4.66 OFW. A swap disc is required in line with current usage of Cobra ODE on OFW 4,66 and 4k consoles.

The DMC module has an Actel FPGA on board which controls the optical lens' units disc eject motor, thus enabling the user to insert and remove discs without detection by the drive controller. The onboard FPGA is linked to a USB PHY which enables full reprogramming of the FPGA at any time via USB connected to your PC.

The Cobra DMC connects to the Cobra ODE (all models) via the JTAG 24 pin FFC port on the Cobra ODE and the "main" port on the Cobra DMC. Cables are included.

The Cobra DMC can be mounted adjacent to the optical drive of the PS3. The module then connects to the eject motor inside the drive, without soldering via FFC cables.

For more info visit:

http://www.team-cobra-ode.com/index.html

More details to come!

• testing and results with v4.66 OFW
• official packaging contents
• info posted via Cobra (manufacturer) website

All machines will be fully tested and shipped via the shipping method you choose at checkout.

Once we receive your console there is a 2-3 day turn around, to do the install and testing, then your console is shipped back out.

Service valid for all Lite-On PHAT Drives!

Buy Online and Save!

All installation is guaranteed 100% with a 30 day limited warranty. Just purchase this service, select your shipping method at checkout and send in your console! We will install the Xbox 360 LT Plus ixtreme Firmware, fully test your console, and ship back via the shipping method you have already prepaid!

NOTE: Please send the CONSOLE ONLY. No cables, controllers, harddrive or any other pieces needed. If you send anything extra this will cost us more for shipping and we will have to bill you accordingly.

Please follow our return polices link for info on how to ship your 360 to us. http://www.gocybershopping.com/pages.php?pageid=7