Brand New Xbox 360 Phillips BenQ DVD Drive Model VAD6038!
Great Drive to replace your old XBox 360 DVD ROM!
NOTE: No firmware has been installed to this device.
These are a replacement LITEON DG-16D2S DVD drive for the Xbox 360, they are hard to get a hold of brand new as many sold online are refurbished from the factory.
If you’re repairing for Xbox 360 consoles and need a solid for Xbox 360 replacement DVD drive, the LITEON DG-16D2S is the best option out there to date.
Note about swapping XBox 360 DVD Drives:
With all Xbox 360 DVD drives you need to extract the DVD key from your old drive's BIOS and flash that key into the drive you are replacing it with. You may also need to spoof the drive if you're not replacing a drive with the exact same brand or model. This is not a simple swap-out procedure and should only be performed by a competent technician.
NO RETURNS FOR BUYING ERRORS FOR THIS ITEM.
This is a 1GBIT NAND PCB Add-on for the PROGSKEET programmer. Allows Dual Nand features allowing multiple scenarios and uses for consoles with 128MB NAND onboard flash memory
Uses 2 x 32 pin ZIF sockets on each side of the PCB so requires the PROGSKEET Adaptor PCB Kit
The ProgSKEET Programmer is a flasher that more or less only works with NAND-based phat-style PS3s. However, this is the tool designed to use with the new hardware should you be lucky enough to have one. According to the release notes, the process is twice as fast as the existing INJECTUS flasher. In case you want to use it on different hardware, it will also operate on any ACTEL A3P device with support for AutoGG incoming.