OUT OF STOCK
The 360 NandFlasher from Maximus is one of the latest products from the team which allows you to read and write to the NAND firmware chip of the 360, this can be useful in many ways, the first is for people that have consoles that either the drive has totally died and the key for the drive is lost, or that bought damaged consoles that had no drive at all, with the Maximus 360 NandFlasher you will now be able to use the device to read the DVD key right out of the motherboards NAND firmware chip, once you have this key you can then embed it into a new drives firmware and recover the console, we know this is going to be a hugely popular service related tool as there are many people that have consoles like this laying around that they can now recover and sell as refurbished units, where before they were just junk laying in workshops.
If you are a repair centre looking for a cheap yet valuable USB 360 Nand flashing tool to recover dead consoles, or a home user wanting to expand their experience with the 360, the 360 Nand Flasher from Maximus is going to do what you need and be a solid and reliable device. Do note that in its current form to use the 360 NandFlasher soldering is involved, so before you order keep that in mind and make sure you have the right tools and knowledge on how to solder.
Arduino Uno is the ideal board for getting started with electronics, through fun and engaging hands-on projects. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. Arduino Uno Rev3 is the most used and documented board in the Arduino family. Thanks to the lively and helpful community surrounding the Arduino Uno, no one will find themselves without support.
Arduino Uno Rev3 is a microcontroller board based on the ATmega328P, an 8-bit microcontroller with 32KB of Flash memory and 2KB of RAM. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno board is the first in a series of USB boards and it is the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Comparison Page.
|Digital I/O Pins||6|
|Analog Input Pins||6|
|Flash Memory||32 KB|
|Clock Speed||16 MHz|
The Uno is open-source hardware! These are the relevant files:
If you want more information about programming the Arduino Uno or how to interface hardware with it, please go to the Product Page.
Arduino Uno Rev3 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.