The MOLEXT is the first professionally manufactured, high powered portable Molex power supply unit that is an absolute must have for any serious mobile modder.
Batteries and AC/DC Power supply not included but will be available to purchase separately.
Team Maximus releases the Stinger 3.0L to RGH your XBox360 PHAT and SLIM (Trinity)
Fast RGH 2 glitcher chip.
New Model 3.0L (with crystal for Corona compatibility) PAD by PAD compatible with last Stinger 2.0, it uses same .jed or .xsvf files, the improvement are:
To use the 68nf capacitor for stubborn PHAT consoles just bridge the J68NF jumper and add a Ground wire on the AVG pad to the AV port.
The SLIM program works on all TRINITY boards.
The PHAT program works on all HDMI models (Falcon, Zephyr, Jasper), and once programmed the model is chosen by setting the onboard solder jumpers.
Chips can be reprogrammed using NANDFLASHER (updated to nandpro 3.0) or any JTAG cable.
Hardware is the same for PHAT and SLIM. It is only the on-board program which can of course be changed later by the end user if needed.
Replace your Xbox 360 DVD Drive if you are experiencing the following problems with your XBOX 360 Slim:
These are genuine replacement drives removed from other XBox 360 SLIM consoles by the manufacturer.
Tested at our supplier's facility and are fully functional.
You will need to flash your drive key onto this board to make your drive work with your for Xbox 360 SLIM. Or swap the logic board.
Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.
Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)