Beware of clones! Only buy from authorized resellers!
NOTE: THESE WORK GREAT FOR PHAT 360 CONSOLES! OUR TECH HAS TESTED THEM AND FOUND THEM TO BE THE BEST PERFORMANCE.
NOTE: The Mtx Glitcher ships with empty CPLD, it needs programming via JTAG. The Matrix NAND Programmer WILL NOT work to program the Matrix Glitcher, it is strictly for the NAND flash located on the Xbox 360 motherboard.
For matrix glitcher you need the jrp v2 (order from the drop down menu)
You need to solder directly to the chip and run wires from the jrp v2
Please use the rgh2 glitch hack diagram
The Matrix Glitcher 360 features a xilinx cpld with on board voltage switch for phat consoles and a built-in jtag port to ensure current and future compatibility with the "GliGLi hack" implementation.
A pdf with the complete procedure to implement the GliGli Hack (made by Razkar and Tuxuser) as well as all the needed files are mirrored in the download section found here.
• Booting of unsigned code on Xbox 360
• Compatible with both X360 (except Xenon)
• Works with all X360 NAND programmers
• Compatible with all X360 kernel versions
• Quick installation (7 Wires on Slim or 6 Wires on Phat)
• Compact PCB size with easy to solder pads.
• Booting of X360 unsigned code within max of 2 minutes
• Matrix Design and Quality
• Budget pricing
Matrix NAND Programmer – (Release date 8 September 2011)
Cost effective NAND reader / programmer to complete the GliGli Hack..
• Fast USB SPI 360 NAND programmer!
You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey MaKey.
Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator clips. The MaKey MaKey is an invention kit that tricks your computer into thinking that almost anything is a keyboard. This allows you to hook up all kinds of fun things as an input. For example, play Mario with a Play-Doh keyboard, or piano with fruit!
The MaKey MaKey uses high resistance switching to detect when you’ve made a connection even through materials that aren’t very conductive (like leaves, pasta or people). This technique attracts noise on the input, so a moving window averager is used to lowpass the noise. The on-board ATMega32u4 communicates with your computer using the Human Interface Device (HID) protocol which means that it can act like a keyboard or mouse.
There are six inputs on the front of the board, which can be attached to via alligator clipping, soldering to the pads, or any other method you can think of. There are another 12 inputs on the back, 6 for keyboard keys, and 6 for mouse motion, which you can access with jumpers via the female headers. If you wish to use a different set of keys, or otherwise change the behavior of your MaKey MaKey, you can simply reprogram it using the Arduino environment. Oh yeah, we didn’t mention that the MaKey MaKey is an Arduino-compatible controller? That’s right, it runs the Leonardo bootloader so reprogramming is fast and easy.
Note: Now included with the MaKey MaKey is a USB cable, pack of jumper wires as well as a pack of alligator clips!
Note: See the GitHub link below for support with the Arduino IDE.
Multi-function Anti-spy Detector K18 Camera GSM Audio Bug Finder GPS Signal Lens RF Tracker