Team Xecuter developed the first ever Xbox 360 connectivity kit back in 2006 and although it's success has been imitated it has never been bettered. We now present the first of the latest upcoming upgrades to the world famous CK3 product range.
We present to you the successor the CK3 Pro - the all new Xecuter CK3i.
The last few months have seen many changes to how a 360 DVD Drive is powered and manipulated in order to read/write its DVD key and firmware. So much so that it was time for a complete overhaul of how the CK3 worked and to bring it right up to date in order to be ready for whatever 2011/12 had in store.
Now we have tools such as the Xecuter CK3 Probe 3, it has become clear that RS232 serial is no longer required to extract the drive key. We have also taken all of the technology that had been built into the CK3-CP and embedded all of that into the new CK3i and thanks to our partnership with Jungle Flasher we have been able to completely embed all of the automated functions so that working with 360 DVD Drives is now easier than ever before.
The layout of the entire circuit has also been completely redesigned using the same high end facility that produces the uber successful X360USB PRO and is now more reliable, safer to use and with even more protections in place to safeguard against any errors.
You will also be happy to know that the Xecuter CK3i is released complete with its slick designed case to give extra protection and to give it a quality design that is not just on the inside but on the outside too.
•100% Compatible with all XBOX 360 DVD drive models both Phat and Slim.
•100% Compatible with all flashing tools inc Jungle Flasher
•JungleFlasher Controlled Power ON/OFF/CYCLE
•Manual Controlled Power ON/OFF/CYCLE
•JungleFlasher Controlled Eject Open/Close/Half Tray
•Manual Controlled Eject Open/Close/Half Tray
•JungleFlasher Controlled ModeB
•Manual Controlled ModeB
•Self-Resetting PPTC Fuses to prevent damage if you plug in the power cable incorrectly
•Extra power filters for a cleaner, safer design
•Auto/Manual Mode LED's
•Power On/Off LED
•ModeB On/Off LED
•Includes USB Cable
•Custom Designed Case
•High Build Quality
•Trusted Xecuter Design
•Windows PC (XP/VISTA/7 32 Bit)
•Compatible SATA (Recommend X360USB PRO)
•Latest Jungle Flasher Software
•Good Quality Molex Power Supply
•Liteon DG-16D2S Key Extraction Requires a CK3 Probe 3
•Windows Drivers Download: Click Here
Comes with FREE Molex to Sata Power Adapter and Bonus Wall Power Cable
This unit is great for powering your CK3 Pro or CK3 Lite so you do not need to plug it into your PC for power which makes it much easier!
100-240VAC (US/UK/EU) to 12v/5V DC Power Supply with 4 Pin Molex. This DC Power supply is a great addition to any PC techs toolkit. Hook up CK3's, fans, drives, cathodes or pretty much anything you want that has a Molex connector without having to take your PC apart.
Actual unit may be slightly different than the one pictured depending on the most current model available - features & functionality are identical. input: 100-240VAC, 50/60Hz,0.5A. Output: 12V-2A,5V-2A
Due to the power cord being different sockets for different countries, it is not supplied. It is a standard 3 pin power lead that is used on most PC's and electrical devices.
Please note: These adapters are originally made for powering hard drives / disc drives outside your computer so pin #2 is not grounded. Some devices (I.E cathodes) require pin 2 to be grounded. Please check your device before purchasing.
Never solder/unsolder the trace cut again!
When using a Sputnik Probe you have to repair the trace when you have finished programming, and if you ever need to flash the drive again you would have to de-solder.
This simple PCB add-on enables you to solder the board once and then thats all you will ever need to do. The simple switch will open / close the circuit and there is an extra large pad to use when probing for when you need to unlock the SPI.
Open / Close trace cut without further soldering
Large pad for easy probing
Easy to install - takes minutes!
NOTE: This is NOT the SPUTNIK360 - Liteon DG-16D4S DVD Unlock Switch, this is an addon product for the SPUTNIK360 PROBE and will not unlock the SPI without the use of the Probe.
This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.
Disassembling the Xbox 360 Slim console is tough and a pain to work with. A lot of gamers broke their console trying to disassemble the Slim and we are now releasing an X8 Unlock tool set (total of 8 pieces with special made screwdrivers) for opening Xbox 360 Slim consoles. It will be quite easy to open the Slim console with the correct set of tools now.
How to Dissassemble Xbox 360 Slim using X8 X-Tool Slim Unlock Tool:
These are an Xecuter Nand-X CK3 CK3i update cable that can be used in conjunction with the Xecuter CK3 Pro or CK3i to re-program your Nand-X with the NandPro 3 firmware so you can then use the Nand-X Coolrunner programming cables to program your coolrunner boards for installation over USB. If you don’t update your Nand-X to NandPro 3 then you won’t be able to make use of the handy Nand-X CoolRunner programming cable the team are releasing to be used with the Nand-X to program the CoolRunner boards over USB. There is another alternative to program your CoolRunner boards which is if you have an old school LPT JTAG cable and they can be programmed by that, or Xecuter are also releasing their own professionally made LPT JTAG cables which can also be used, but it will require you have an LPT port on your PC. The simplest way to program your CoolRunners will be using the Nand-X and as we said above to be able to do that you are going to need to update your Nand-X to the Nand Pro 3 firmware using a CK3 Pro or CK3i along with this cable.
Xecuter are going to release a USB to Nand-X programming cable soon which means you won’t need a CK3 or CK3i along with this cable to update the Nand-X, you will be able to just use the USB to Nand-X cable alone, but word is they won’t be released until a few weeks after these cables. So for now if you want to be able to program your CoolRunners using the Nand-X & Coolrunner programming cable you will need to buy one of these CK3 CK3i to Nand-X programming cables to update your Nand-X to Nand Pro 3.
CUSTOMERS WILL RECEIVE R4I 3DS RTS
Updated to DSi 1.4.4 and 3DS 4.3
ONLINE PRICING DOES NOT APPLY TO IN-STORE PRICING!
Anti-counterfeit version - Enter Serial number here http://www.acekard.com/bar_code.php to verify it is not a clone!
If you require additional memory, you can add it to your cart from the dropdown menu below.
The all new and all powerful Acekard 2i offers support for NDS, NDS Lite, and the new DSi. Acekard 2 has many great features and is a great buy. The interface is by far the best of any cart available.
Acekard 2i use the technology of directly writting save file to MicsoSD card. No need to manually select save size or backup save when turn on DS. No battery needed. Acekard 2i can use save files from other flash carts and you do not need convert. All you need to do is make sure the save file has the same prefix name and put it at the same directory as the homebrew. Then you can just run the homebrew to use the new save file.
Acekard 2i inherits the best quality of acekard's products. You can just drag and drop homebrew software on MicroSD card to run. On first boot it takes some time to create save file. The loader time after save file is created is very fast.
The Acekard 2i is compatible with all homebrew because of the DLDI auto-patcher. You can just copy the homebrews to the MicroSD card and run it. You can use Moonshell, one of the most well known homebrew software on DS, for multi media. Watching movie, listening MP3, reading TXT novel on DS is so easy!