New from Team Xecuter. Ever needed fast molex power and you can't get your hands on a power supply ?
This handy cable provides a full 5V from your USB port to a Molex connector giving you full power to be able to update the firmware on your 360 DVD Drive.
You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great cable thats useful in any modders toolkit.
Comes with FREE Molex to Sata Power Adapter and Bonus Wall Power Cable
This unit is great for powering your CK3 Pro or CK3 Lite so you do not need to plug it into your PC for power which makes it much easier!
100-240VAC (US/UK/EU) to 12v/5V DC Power Supply with 4 Pin Molex. This DC Power supply is a great addition to any PC techs toolkit. Hook up CK3's, fans, drives, cathodes or pretty much anything you want that has a Molex connector without having to take your PC apart.
Actual unit may be slightly different than the one pictured depending on the most current model available - features & functionality are identical. input: 100-240VAC, 50/60Hz,0.5A. Output: 12V-2A,5V-2A
Due to the power cord being different sockets for different countries, it is not supplied. It is a standard 3 pin power lead that is used on most PC's and electrical devices.
Please note: These adapters are originally made for powering hard drives / disc drives outside your computer so pin #2 is not grounded. Some devices (I.E cathodes) require pin 2 to be grounded. Please check your device before purchasing.
This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)
Fully compatible with iMPACT software and tested 100% with various Xilinx products that have a JTAG port including the Xecuter CoolRunner.
Comes complete with an Xecuter CK3 custom power cable for the Xecuter CoolRunner while updating over LPT.
Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.
Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)
This charging station offers a home to dock and charge your Xbox 360 controller and also a separate battery charger slot. Extend your game play and power up those endless nights of nonstop gaming. The charging dock is equipped with smart battery indicators to show battery status. The Led status lights let you know when each battery is partially or fully charged. No separate power supply required, easily connects to your Xbox 360 USB port.
Team Maximus releases the Stinger 3.0L to RGH your XBox360 PHAT and SLIM (Trinity)
Fast RGH 2 glitcher chip.
New Model 3.0L (with crystal for Corona compatibility) PAD by PAD compatible with last Stinger 2.0, it uses same .jed or .xsvf files, the improvement are:
To use the 68nf capacitor for stubborn PHAT consoles just bridge the J68NF jumper and add a Ground wire on the AVG pad to the AV port.
The SLIM program works on all TRINITY boards.
The PHAT program works on all HDMI models (Falcon, Zephyr, Jasper), and once programmed the model is chosen by setting the onboard solder jumpers.
Chips can be reprogrammed using NANDFLASHER (updated to nandpro 3.0) or any JTAG cable.
Hardware is the same for PHAT and SLIM. It is only the on-board program which can of course be changed later by the end user if needed.