ARDUINO MEGA 2560 REV3

IN STOCK

 

Overview

Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.

Technology

The Mega 2560 is a  board based on the 8-bit AVR microcontroller ATmega2560 by Atmel. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports). It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable. The Mega 2560 board is compatible with most shields designed for the Uno. To compare this board to the current, past or outdated boards see the Comparison Page.

Microcontroller	ATmega2560
Operating Voltage	5V
Input Voltage (recommended)	7-12V
Input Voltage (limit)	6-20V
Digital I/O Pins	54
PWM Digital I/O Pins	14
Analog Input Pins	16
DC Current per I/O Pin	40 mA
DC Current for 3.3V Pin	50 mA
Flash Memory	256 KB
Flash Memory for Bootloader	8 KB
SRAM	8 KB
EEPROM	4 KB
Clock Speed	16 MHz

 

Documentation

Arduino MEGA 2560 is open-source hardware! These are the relevant files:

Schematics - Reference Design - Board size

If you want more information about programming the Arduino Mega 2560 or how to interface hardware with it, please go to the Product Page.
Arduino Mega 2560 is programmed, as all the other Arduino boards  with the Arduino Software (IDE) that you can download for free.

Arduino Uno Rev3 is programmed, as all the other Arduino boards  with the Arduino Software (IDE) that you can download for free.

Dreamcast RF Unit (PAL B) ! Hook up your Dreamcast console to the Antenna port of your TV.

IN STOCK

The ProgSkeet JTAG Injectus USB Programmer from the Infectus Team is the most advanced programmer for every ProgSkeet NAND / NOR / EEPROM USB Programmer or the ARGON and INFECTUS ModChip. It supports USB 2.0 and with the high professional programmer software can you easy reflash your ProgSkeet V1.0 and V1.1 or the ARGON chip. The ProgSkeet JTAG Injectus USB Programmer is the perfect complement for every ProgSkeet Developer!

The Injectus programmer is a JTAG programmer for the following devices:

• Progskeet
• Argon
• Dright (1 wire needs to be soldered on to make it compatible)

 

Contents:

• 1x Injectus Programmer
• 1x FCC programming cable 15-pin 40cm