Controller Adaptor for Nintendo Switch NX
The PIC18F4550 USB Dev Kit is loaded with features, including a large 32kb of program memory, optimized for C programs. The PIC18F4550 Development Board comes complete with the Microchip PIC18F4550 microcontroller pre-installed, together with the necessary crystal and power supply components, for a ready-to-run solution. Simply connect the power and download your program, using the easy to use programming interface and software, and your ready to start exploring the new PIC18 USB.
PIC18F USB Dev Kit Programs can be downloaded or updated directly to the microcontroller using the USB in-circuit programming interface together with a suitable programmer or MPLabs HID Bootloader software.
Now works with v3 Heremes!
Pushbuttons and LED's are also included on our development board for testing and developing your code. This board is the ideal for applications requiring a USB Connection together with a large number of A/D inputs for monitoring and control.
Our new PIC18F4550 Development board will get you started with an inexpensive, ready-to-run solution, which is ideal for the student or hobbyist.
IN STOCK VERSION 4 DISCONTINUED ONLY VERSION 5 AVAILABLE
(NOTE: IF WE ARE OUT OF V4 YOU WILL RECEIVE V5 INSTEAD)
The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v16 and it is also compatible with the newly released SCPH-7700x & 7900x consoles. Its PCB layout is a perfect “L” shape which makes install a breeze. We believe this chip is a great solution for those looking for a compact and feature packed chip without the high price tag. We also want to explain to customers that there are two producers of the Modbo range of chips, first are the guys at Modbo.com who produced the Modbo 3.0 & Modbo 4.0. Second are the guys over at Modbo2.com who produced the Modbo v2.1 & Modbo 745.
A major difference we found between Modbo 4 and Modbo 745 is the Modbo 4.0 does work from v5 to v16 as advertised, but the Modbo 745 has trouble working in consoles under v9. Another bonus with the Modbo 4.0 is its now running the Matrix Infinity firmware v1.91 and is also possible to upgrade the firmware at a later date without any problems. If that wasn’t enough, they have now managed to get the firmware’s config menu and all its options to work and save. You can now go into the config menu and setup the Modbo 4 the way you want it, this is extremely handy for a lot of reasons. The Modbo 4.0 also uses a clock point, some of our customers have found that chips using a clock point “CX” are generally more stable then the same type of chip not using a clock point.
The Modbo 4.0 is a clone of the original Matrix Infinity range of PS2 mod chips. One of the major improvements Modbo 4 has over other Matrix clones is its better compatibility with DVD 9 and runs dual layer much better then older models. Modbo 4.0 comes on a differently laid out pcb to earlier model Modbo chips, allowing for a slightly neater install. There are a few clones of the Matrix Infinity floating around, Modbo , AppleEx , Matrix Infinity SE and some more. The good thing about these chips is you are getting most of the functions of the original Matrix Infinity at the fraction of the cost. The Modbo 4 also has auto media detection for direct booting and All Region DVD Support. The Modbo 4 also comes with a Diode fix for the PSTwo Slimline v12.
INSTALLATION DIAGRAMS: (RAR download) v5 to v19