PS Vita 3G to microSD card adapter v2.1
NOTE: NO NEED TO SOLDER THE JUMPER WIRE, THESE ARE WORKING 100%
NOTE: NEW INSTRUCTIONS AND NEW SOFTWARE FOR DOWNLOAD:
modify ur0:tai/config.txt and add ur0:tai/usbmc.skprx under the line that says *KERNEL.
Also copy usbmc.skprx under ur0:tai.
Copy the Enso.vpk, usbmc_installer, vitashell.vpk to UX0: apps
2. Install usbmc_installer
3. Click usbmc_installer bubble , install and then
4. Go back usbmc_installer, press cross and then square
After reboot, you can see the sd card
References YouTube link:
Two-player adapter compatible with PS, PS2, and PS3 joypads.
Use your Joypads for PS, PS2, PS3, Guncon Compatable Guns, racing wheel or dancing controller with your PC, PS2 or PS3 Supports all buttons, including the two analog knobs
Service - PS2 Modchip INSTALLATION For Slim Console any version No experience with soldering? Don't want to damage your PlayStation 2 console? We'll install your modchip for you. One of the best modchips for your Playstation 2, professionally installed by our technicians. All installation is guaranteed 100% with a 30 day limited warranty. Just purchase this service, select your shipping method at checkout and send in your PS2 console! We will install the ModChip, fully test your console, and ship back via the shipping method you have already prepaid! Use our return policy info to send your machine to us. Here is the link: http://www.gocybershopping.com/customer/help.php?section=returns
Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.
The Mega 2560 is a board based on the 8-bit AVR microcontroller ATmega2560 by Atmel. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports). It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable. The Mega 2560 board is compatible with most shields designed for the Uno. To compare this board to the current, past or outdated boards see the Comparison Page.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limit)||6-20V|
|Digital I/O Pins||54|
|PWM Digital I/O Pins||14|
|Analog Input Pins||16|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||256 KB|
|Flash Memory for Bootloader||8 KB|
|Clock Speed||16 MHz|
Arduino MEGA 2560 is open-source hardware! These are the relevant files:
If you want more information about programming the Arduino Mega 2560 or how to interface hardware with it, please go to the Product Page.
Arduino Mega 2560 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.
Arduino Uno Rev3 is programmed, as all the other Arduino boards with the Arduino Software (IDE) that you can download for free.