1-519-884-5545        Contact Us        Sign in

PSone Car Adapter


PSone Car Adapter



Details

Weight
0.35 lbs
Our price
$19.99 (US $19.99)

Options

Quantity


PSone Car Adapter ! Use this PS One Car Adapter to play your PS One game system using the car's cigarette lighter for power. Also connects your LCD monitor to its power source.
  • Customers Also Bought

  • Customer Reviews

  • AUDIO TECHNICA HEADPHONES ATHPRO5 V

    Type Closed-back Dynamic
    Driver Diameter 40 mm
    Magnet Neodymium
    Voice Coil Copper-clad aluminum wire
    Frequency Response 15 ? 28,000 Hz
    Maximum Input Power 1,300 mW
    Sensitivity 103 dB/mW at 1 kHz
    Impedance 40 ohms
    Weight 200 g
    Cable 1.5 m (Single) (OFC)
    Connector 3.5 mm mini stereo, gold-plated
    $109.99
  • Injectus JTAG Programmer

    IN STOCK

    The ProgSkeet JTAG Injectus USB Programmer from the Infectus Team is the most advanced programmer for every ProgSkeet NAND / NOR / EEPROM USB Programmer or the ARGON and INFECTUS ModChip. It supports USB 2.0 and with the high professional programmer software can you easy reflash your ProgSkeet V1.0 and V1.1 or the ARGON chip. The ProgSkeet JTAG Injectus USB Programmer is the perfect complement for every ProgSkeet Developer!

    The Injectus programmer is a JTAG programmer for the following devices:

    • Progskeet
    • Argon
    • Dright (1 wire needs to be soldered on to make it compatible)

     

    Contents:

    • 1x Injectus Programmer
    • 1x FCC programming cable 15-pin 40cm
    $24.95
  • PS2 ModBo v4.0

    IN STOCK VERSION 4 DISCONTINUED ONLY VERSION 5 AVAILABLE

    (NOTE: IF WE ARE OUT OF V4 YOU WILL RECEIVE V5 INSTEAD)

    The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v16 and it is also compatible with the newly released SCPH-7700x & 7900x consoles. Its PCB layout is a perfect “L” shape which makes install a breeze. We believe this chip is a great solution for those looking for a compact and feature packed chip without the high price tag. We also want to explain to customers that there are two producers of the Modbo range of chips, first are the guys at Modbo.com who produced the Modbo 3.0 & Modbo 4.0. Second are the guys over at Modbo2.com who produced the Modbo v2.1 & Modbo 745.

    A major difference we found between Modbo 4 and Modbo 745 is the Modbo 4.0 does work from v5 to v16 as advertised, but the Modbo 745 has trouble working in consoles under v9. Another bonus with the Modbo 4.0 is its now running the Matrix Infinity firmware v1.91 and is also possible to upgrade the firmware at a later date without any problems. If that wasn’t enough, they have now managed to get the firmware’s config menu and all its options to work and save. You can now go into the config menu and setup the Modbo 4 the way you want it, this is extremely handy for a lot of reasons. The Modbo 4.0 also uses a clock point, some of our customers have found that chips using a clock point “CX” are generally more stable then the same type of chip not using a clock point.

    The Modbo 4.0 is a clone of the original Matrix Infinity range of PS2 mod chips. One of the major improvements Modbo 4 has over other Matrix clones is its better compatibility with DVD 9 and runs dual layer much better then older models. Modbo 4.0 comes on a differently laid out pcb to earlier model Modbo chips, allowing for a slightly neater install. There are a few clones of the Matrix Infinity floating around, Modbo , AppleEx , Matrix Infinity SE and some more. The good thing about these chips is you are getting most of the functions of the original Matrix Infinity at the fraction of the cost. The Modbo 4 also has auto media detection for direct booting and All Region DVD Support. The Modbo 4 also comes with a Diode fix for the PSTwo Slimline v12.

    INSTALLATION DIAGRAMS: (RAR download) v5 to v19

    Installation Video:

    $10.00

Categories

Manufacturers

Recently Viewed

Bestsellers